Philips 23iF9946 Flat Panel Television User Manual


 
10
2.3 If you want to make a wired connection
Option C
In this configuration your Streamium LCD TV and
computer already have a free ethernet connector (or a
wired network with a ethernet connector).
•You will be connecting an Ethernet network cable
between the Streamium LCD TV and your computer
or wired network.
•You will be able to send music, photos, and movies
from your computer to your Stremium TV.
Ethernet ports and cables look just like telephone
connections and lines, but are thicker and wider.
Ethernet (RJ-45) connectors have eight contacts,
whereas standard telephone line (RJ-11) connectors
have four or six.
Important: only use CAT.5 shielded Ethernet
cable (STP).
1a Use a crossover Ethernet cable if you want to
connect the Streamium LCD TV directly to
your computer.
In a crossover Ethernet cable, the arrangement of the
coloured wires changes between the two ends.
– Push one end of the Ethernet cable into the
connector on the back of the Streamium LCD TV.
– Push the other end into the Ethernet connector of
your computer.
Note : Your computer needs to have an Ethernet connector
available.
OR
1b Use a straight-through Ethernet cable if you
want to connect the Streamium LCD TV to
an existing computer network.
In a straight-through Ethernet cable, both ends have
the same arrangement of coloured wires.
– Push one end of the Ethernet cable into the
connector on the back of the Streamium LCD TV.
– Push the other end into a free Ethernet connector
on your central network device, like a hub, switch or
router.
Note : Your network needs to have an Ethernet connector
available.
Ethernet port required
Network hub
Installing
23iF9946_12_StDFU_ENG.p65 8/31/04, 4:30 PM10