Filter
Top Products
3
Remote control keys
Teletext key (p.8)
Select peripherals (p.10)
Press several times to select the
required EXT connector.
Sound mode
Used to force programmes in
Stereo and Nicam Stereo to Mono
or, for bilingual programmes,to
choose between
Dual I or Dual II.
The Mono indication is red when in
forced position.
Unused key.
TV / PC / Radio
Press one of these keys to switch
the television between TV, PC or
radio mode (p.9).
Cursor (UP/DOWN/LEFT/RIGHT)
These 4 keys are used to move
around the menus
(<>≤≥)
.
16:9 Format (p.7)
Mute
To mute or restore the sound.
Volume
To adjust the sound level.
Smart picture and sound
Used to access a series of predefined
picture and sound settings.
The personal position relates to
settings selected from the menus.
Screen information
To display / remove the programme
number, the time,the sound mode
and the time remaining on the
timer. Hold down for 5 seconds to
permanently display the
programme number on the screen.
Standby
To set the TV to standby mode.
To switch the TV set on again,
press .,P - + or ñ/ô.
Mode selector *
Previous programme
To access the previously viewed
programme.
Surround Sound
To activate / deactivate the
surround sound effect. In stereo,
this gives the impression that the
speakers are further apart. For
models equipped with Virtual
Dolby Surround*, you can
experience Dolby Surround Pro
Logic sound effects.
Active control
Optimizes the picture quality depending
on the quality of the incoming signal
and the ambient light conditions.
Menu
To call up or exit the menus.
Selecting TV programmes
To move up or down a programme.
The number and the sound
mode are
displayed for a few seconds.
For some TV programmes the title of
the programme appears at the
bottom of the screen.
Numerical keys
For direct access to programmes.
For a 2 digit programme number,
the 2
nd
digit must be entered
before the dash disappears.
Teletext (p.8)
* Manufactured under license from
Dolby Laboratories.“Dolby” and the
double-D symbols are trademarks
of Dolby Laboratories.
Not applicable for TV mode.
* Mode selector
Press the Select key to select the required mode : TV, DMR (other equipment) or STREAMIUM.
The remote control indicator lights up to display the selected mode. It switches off automatically after 20 seconds if
left idle.The remote control automatically returns to TV mode.
For more information about the STREAMIUM functions, see the separate documentation.
For more information about the STREAMIUM functions, see the separate documentation.