Filter
Top Products
10
Connecting peripheral equipment
Carry out the connections shown opposite,using a good quality
euroconnector cable.
If your video recorder does not have a euroconnector socket, the only
connection possible is via the aerial cable.You will therefore need to
tune in your video recorder's test signal and assign it programme
number 0 (refer to manual store, p. 5).
To reproduce the video recorder picture, press
ñ.
Video recorder with decoder
Connect the decoder to the second euroconnector socket of
the video recorder.You will then be able to record scrambled
transmissions.
Remove the stand cover and the clip on rear panel of the television to expose the connectors.
Arrange the leads by passing them through the television stand. Replace the stand cover.
The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.
Video recorder
Satellite receiver, decoder, CDV, games, etc.
Carry out the connections shown opposite.
To select connected equipment
Press the
µ key to select EXT1.
Most equipment (decoder, video recorder) carries out the switching itself.
Other equipment
VCR
EXT 1FM ANT
:
EXT 1FM ANT
:
AV in
AV 3
S-VIDEO
VGA In Audio InAudio Out
EXT 1FM ANT
: