Filter
Top Products
5
Manual store
Other settings in the Install menu
This menu is used to store the programmes
one at a time.
& Press the
h key.
é With the cursor, select the Install menu then
Manual store:
“ System: select
Europe (automatic detection*)
or
Western Europe (BG standard),Eastern
Europe (DK standard), United Kingdom (I
standard) or France (LL’ standard).
* Except for France (LL’ standard), you must select
choice France.
‘ Search: press cursor
RIGHT.The search starts.
Once a programme is found, the scanning stops
and its name is displayed (when available). Go
to the next step. If you know the frequency of
the required programme, this can be entered
directly using the
ñ to ô keys.
If no picture is found, consult the possible solutions (p. 12).
( Program No.: enter the required number
with the cursor LEFT/
RIGHT or ñ to ô
keys.
§ Fine Tune: if the reception is not satisfactory,
adjust using the cursor LEFT/RIGHT.
è Store: press cursor
RIGHT.The program is
stored.
! Repeat steps ‘ to ! for each programme to
store.
ç To quit the menus, press ∂.
& Press the h key and select the Install menu:
é Language: to change the display language for
the menus.
“ Country: to select your country (GB for
Great Britain).
This setting is used for the search, automatic
programme sort and teletext display. If your country
does not appear in the list, select “. . .”
‘ Auto Store: to start automatic search for all
programmes available in your region. If the
transmitter or cable network sends the
automatic sort signal, the programmes will be
numbered correctly. If this is not the case,you
need to use the Sort menu to renumber the
programmes (see p. 4).
Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.). In
this case, indicate your choice using the cursor
UP/DOWN and validate with cursor RIGHT.To quit
or interrupt the search, press
h. If no picture is
found, consult the possible solutions (p. 12).
( Name :
If required, you can give a name to the
programmes and external connectors.Use the
cursor LEFT/RIGHT
to move around the name
display area (5 characters) and the
cursor
UP/DOWN
to select the characters.When the
name has been entered, use the
cursor LEFT
to
exit.The name is stored.
Note: on installation, the programs are named
automatically when an identification signal is sent.
§ To quit the menus, press
∂.
TV Menu
Picture
Sound
Features
Install
Mode
Manual Store
System
Search
Program No.
Fine Tune
Store
Europe
Program sort
& Press key h.The TV Menu is displayed on
the screen.
é With the cursor, select the Install menu
followed by the Sort menu.
“ Select the programme you want to move using
the cursor
UP/DOWN and press cursor RIGHT.
‘ Then use the cursor
UP/DOWN to select the
new number and validate with cursor
LEFT.
( Repeat steps “ and ‘ for each program you
wish to renumber.
§ To quit the menus, press
∂.
TV Menu
Picture
Sound
Features
Install
Mode
Install
Language Æ •
Country Æ •
Auto Store Æ •
Manual Store Æ •
Sort Æ •
Name Æ •
0
1
2
3
4
5