Filter
Top Products
02
14
En
Chapter 2
Installation
Cautions on use
• Please note that Pioneer will accept no responsibility
whatsoever for loss of business opportunities or other
damages due to breakdown of the set.
• Please note that Pioneer will accept no responsibility
whatsoever for problems resulting from the use of the
set, regardless of the method of installation.
• Please note that Pioneer will accept no responsibility
whatsoever for loss of data resulting from use or
breakdown of the set, or for any direct or indirect
damages incurred thereby.
Cautions on Installation
Install and use the set in a level, stable place. Do not use
it on shaky, unstable surfaces or places subject to strong
vibrations.
The current will surge if the power to several units of the
set is turned on or off simultaneously from an external
device. For the value per unit, see Specifications on
page 75.
Caution
• When installing the set in an EIA rack, be sure to use
the included rack mount brackets. Using anything
else could cause damage to the set or injury. For
details on mounting, etc., see Installation Procedure
on page 16.
• When the included rack mount brackets are used, the
player can be mounted to universal pitch or wide
pitch racks conforming to EIA 19" standards.
Place of installation
Select a stable place near the TV and AV system to which
the unit is connected.
Do not place the player on top of a TV or color monitor.
Keep it away from cassette decks or other components
easily affected by magnetism.
Avoid the following types of places:
•Places exposed to direct sunlight or strong artificial light
• Places subject to vibration
•Places exposed to strong electromagnetic or
magnetic forces
• Places in which there is much electrical noise
• Places in which electrostatic noise tends to be
generated
•Humid or poorly ventilated places
•Closed racks
•Extremely hot or cold places
• Places in which there is much dust or cigarette
smoke
•Places exposed to soot, steam or heat (in kitchens, etc.)
Do not place objects on top
Do not place objects on top of the player.
Do not obstruct the ventilation
holes
Do not use the player on a shaggy rug, bed, or sofa, and
do not cover the player with a cloth, etc. Doing so will
prevent heat dissipation and could lead to damage.
Keep away from heat
Do not place the player on top of an amplifier or other
device generating heat. When installing in a rack, to avoid
the heat generated by the amplifier and other devices,
place it on a shelf below the amplifier whenever possible.
Caution
• When installing the player, leave a space of at least
10 cm between the player and the wall. Also, to
facilitate heat radiation, leave some space between
the player and other equipment. Failure to do so will
cause heat to build up inside the player, leading to
fire.
The player should be used within a surrounding
environmental temperature of +5 to +35
°C and humidity
of 85% or less (without obstructing the ventilation holes).
Do not install in poorly ventilated p laces, places where
the humidity is too high or in places exposed to dir ect
sunlight (or strong artificial light).
Rack mount bracket
Screws removed
from player
V6000_CUXJ_EN.book 14 ページ ２００９年６月５日 金曜日 午前１１時５７分