Filter
Top Products
19
En
03
• The following restrictions apply when HDMI High
Speed Transmission is set to Off:
–Deep Color signals are not output.
–If the output video resolution is set to Auto, the
signals are output with a resolution of 1080/60i or
1080/50i when TV’s preferred resolution is 1080/60p
or 1080/50p.
– When the output video resolution is set to 480i/576i
or 480p/576p, Dolby TrueHD and DTS-HD Master
Audio audio signals are output as Dolby Digital,
DTS Digital Surround or linear PCM signals. 96 kHz
or 192 kHz multi-channel audio signals are output
as linear PCM 2-channel audio signals (page 52).
• When an HDMI cable with a built-in equalizer is
connected, it may not operate properly.
When connected to a DVI device
• It is not possible to connect DVI devices
(computer displays, for example) that are not
compatible with HDCP. HDCP is a specification to
protect audiovisual content across the DVI/HDMI
interface.
• No audio signals are output. Connect using an audio
cable, etc.
•This player is designed for connection with HDMI-
compatible devices. When connected to a DVI device,
it may not operate properly depending on the DVI
device.
About KURO LINK function
The functions listed below work when a Pioneer KURO
LINK-compatible Flat Panel TV or AV system (AV receiver
or amplifier, etc.) is connected to the player using an
HDMI cable.
Functions operated from the TV
Such player operations as starting and stopping playback
and displaying the menus can be performed from the Flat
Panel TV.
Auto-select function
The input switches automatically on the Flat Panel TV and
AV system (AV receiver or amplifier, etc.) when playback
is started on the player or the Home Menu or Home Media
Gallery is displayed. When the input is switched, the
playback picture, the Home Menu or Home Media Gallery
appears o
n the Flat Panel TV.
Simul
taneous power function
When playback on the player is started or the Home Menu
or Home Media Gallery is displayed, if the Flat Panel TV’s
power was off, its power turns on automatically. When the
Flat Panel TV’s power is turned off, the player’s power
automatically turns off.
Unified language function
When the language information from a connected Flat
Panel TV is received, you can have the player’s on-screen
display language change automatically to that of the Flat
Panel TV. This function is available only when playback is
stopped and the menu screen is not displayed.
Caution
•Also refer to the operating instructions of the Flat
Panel TV and AV system (AV receiver or amplifier,
etc.).
Note
• CO
NTROL on the pla
yer’s front panel display lights
when the KURO LINK function is activated (page 13).
To use the KURO LINK function
• The KURO LINK function only works when outputting
video signals from the HDMI OUT terminal.
• The KURO LINK function works when KURO LINK is
set to On on the player (page 44).
• The KURO LINK function operates when KURO LINK
is set to On for all devices connected with HDMI
cables. Once connections and the settings of all the
devices are finished, be sure to check that the player’s
picture is output to the Flat Panel TV. (Also check after
changing the connected devices and reconnecting
HDMI cables.) The KURO LINK function may not
operate properly if the player ’s picture is not properly
output to the Flat Panel TV.
•Use High Speed HDMI™ cables when using the
KURO LINK function. The KURO LINK function may
not operate properly if other HDMI cables are used.
•F
or so
me models, the KURO LINK function may be
referred to as “HDMI Control”.
•The Simultaneous power function is activated when
the player is set as follows (page 44):
Display Power On: On
Display Power Off: On
About PQLS function
The PQLS (Precision Quartz Lock System) is a transfer
control technology using the KURO LINK function. The
player’s output signals are controlled from the AV
receiver or amplifier to achieve high quality sound
playback using the quartz oscillator of AV receiver or
amplifier. This eliminates the influence of the jitter
generated upon transfer which can adversely affect the
sound quality.
•The player supports the “PQLS 2ch Audio” function
that is only activated when playing audio CDs (CD-
DAs), and the “PQLS Multi Surround” function that is
activated when playing all discs (BDs, DVDs, etc.)
with audio output in linear PCM.
• The “PQLS 2ch Audio” function is only activated when
a Pioneer AV receiver or amplifier compatibl
e with the
“PQLS 2
ch Audio” function is connected dir ectly to
the player’s HDMI OUT terminal using an HDMI
cable, and when the player is set as follows (page 44):
KURO LINK: On
PQLS: Auto
• The “PQLS Multi Surround” function is only activated
when a Pioneer AV receiver or amplifier compatible
with the “PQLS Multi Surround” function is
connected directly to the player’s HDMI OUT
V6000_CUXJ_EN.book 19 ページ ２００９年６月５日 金曜日 午前１１時５７分