Filter
Top Products
69
En
09
• No sound is output.
• Sound is not output
properly.
Are you trying to listen to the
sound of the HDMI OUT
terminal while watching the
picture from the
COMPONENT VIDEO or
VIDEO
output
terminals?
Audio signals are not output from the HDMI OUT terminal when video
signals are being output from the COMPONENT VIDEO or VIDEO
output
terminals. When watching the picture of the COMPONENT
VIDEO or VIDEO
output
terminals, connect an optical digital audio
cable or regular audio cables to listen to the sound (page 21). Once
connections are completed, use Setup Navigator to make the player’s
settings (page 23).
Is HDMI Audio Out properly
set?
Set HDMI Audio Out to Auto or PCM. (page 44).
Is Output Terminal properly
set?
When ANALOG AUDIO is selected at Output Terminal, no audio
signals are output from the HDMI OUT or DIGITAL OUT terminal
(page 51).
Is the output video resolution
properly set?
Use OUTPUT RESOLUTION to switch to the resolution at which the
video and audio signals are output (page 27).
Is the AV receiver or
amplifier, etc., connected to
the AUDIO OUT terminals?
To listen to 2-channel analog audio, connect to FRONT (L/R) of the
AUDIO OUT terminals (page 13) and set Audio Output Mode to 2
Channel (page 43).
Are the speaker s properly
set?
When the AV receiver or amplifier, etc., is connected to the AUDIO
OUT terminals and Audio Output Mode is set to Multi-channel, set
Speaker Setup properly (page 47).
Is a DVI device connected?
The sound will not be output from the
HDMI OUT
terminal if a DVI
device is connected. Connect the device to a
DIGITAL OUT
terminal or
the
AUDIO OUT
terminals (page 21).
For some BDs, audio signals are only output from DIGITAL OUT
terminal or the HDMI OUT terminal.
Multi-channel sound is not
output.
Is Output Terminal properly
set?
Linear PCM (2-channel) audio signals are output from output terminals
other than the one set at Output Terminal under Audio Out. Set
Output Terminal properly (page 51).
Is the audio output of the
connected AV receiver or
amplifier, etc., properly set?
Read the operating instructions of the connected AV receiver or
amplifier and check the audio output settings of AV receiver or
amplifier.
Is multi-channel sound
selected?
Use the menu screen or AUDIO to switch the disc’s sound to multi-
channel.
Is the AV receiver or
amplifier, etc., connected to
the AUDIO OUT terminals?
When the AV receiver or amplifier, etc., is connected to the AUDIO
OUT terminals, set Audio Output Mode to Multi-channel (page 43).
Also, set Speaker Setup properly (page 47).
Noise can be heard when
outputting DTS Digital
Surround signals from the
DIGITAL OUT terminal.
Is the connected AV receiver
or amplifier compatible with
DTS Digital Surround?
If an AV receiver or amplifier that is not compatible with DTS Digital
Surround is connected to the DIGITAL OUT terminal, set DTS Out to
DTS PCM (page 43).
192 kHz or 96 kHz digital
audio signals cannot be
output from the DIGITAL
OUT terminal.
It is not possible to output 192 kHz or 96 kHz digital audio signals from
this player’s DIGITAL OUT terminal. The signals are automatically
converted to 48 kHz or less for output.
Secondary audio or
interactive audio is not
output.
Is HDMI Audio Out properly
set?
When listening to the sound from an HDMI OUT termina
l, set HDMI
Audio Out to PCM (page 44).
Are Dolby Digital Out and
DTS Out properly set?
When listening to the sound from an DIGITAL OUT terminal, set Dolby
Digital Out to Dolby Digital 1, DTS Out to DTS 1 (page 43).
Sound is fast or slow. When an HDMI cable is
connected, are audio signals
being output from devices
connected with cables other
than HDMI cables?
When a Pioneer AV receiver or amplifier compatible with the PQLS
function is connected directly to the player’s HDMI OUT terminal using
an HDMI cable, the PQLS function is activated when playing discs.
Because of this, the sound output from components other than the
ones connected by HDMI cable may be fast or slow. If this happens, set
PQLS to Off (page
44).
After a disc is inserted,
Loading stays displayed and
playback does not start.
Are there too many files
recorded on the disc?
When a disc on which files are recorded is inserted, depending on the
number of files recorded on the disc, loading may take several dozen
minutes.
is displayed in file names,
etc.
The characters that cannot be displayed on this player are displayed in
.
Problem Check Remedy
V6000_CUXJ_EN.book 69 ページ ２００９年６月５日 金曜日 午前１１時５７分