Filter
Top Products
6
En
8. Barcode/Command stack
This player, when segment commands and barcodes that
control are input in advance, enables images to be
switched and played back one after the other. This is
very convenient when used in demonstrations, presen-
tations, etc. Furthermore, the RS-232C connection al-
lows uploading/downloading of the set content.
(See page 59)
÷
Uploading/downloading can be easily performed when
dedicated applications are being used.
9. Interface with external signals
(RS-232C, external option switch)
The device is fitted with an RS-232C connection so that
commands can be given to support DVD, Video CD and
CD. The control protocol is, for the most part, compat-
ible with that of LD (Laser Disc) equipment, and LD sig-
nals can also be easily transferred.
Other than the RS-232C interface connector, a terminal
for the external option switch is provided. By simply con-
necting a switch to this terminal, operation is possible for
DVD-VIDEO menu selection and barcode/command
stack calls as well as operation of the remote control
unit.
÷
Consult the User’s Manual for detailed information re-
garding this terminal and RS-232C control commands.
(See your dealer for more information about the User’s
manual.)
10. Video blackboard function
Graphics and characters recorded in advance at desired
positions on the DVD picture screen will appear during
playback.
This function enables demonstrations and presentations
to be more effectively performed. (See page 76)
11. Video Text Retrieval
With this function, you can use the mouse to click on
buttons shown on-screen during playback for display of
indications of the text file corresponding to the selected
button. This is possible only with Video Text Retrieval com-
patible discs. (See page 82)
12. External Synchronizing Function
This terminal allows output of video signals linked to an
external sync signal. (See page 82)
Component Features and Functions
1. High-reliability, high-endurance player
This player features a high-performance brushless spin-
dle motor, and the mechanical components have been
sealed against heat and dust, giving this unit improved
reliability.
2. PAL/NTSC dual playback
DVD discs in either the PAL format or the NTSC format
can be played back. (See page 84)
3. Frame search function
When the frame search function is used, searching is
possible in units smaller than when searching by chap-
ter and time, and any point can be found. (See page 20)
When frame segment playback is used, it is possible to
play back from any point to any point in a video with still
playback at the end. (See page 61, 62)
÷
The frame search function cannot be used with a multi
PGC disc (time is not displayed on the TV screen) or
with a Video CD, etc. Frame segment playback is pos-
sible with the DVD barcode, RS-232C control and a
Barcode/Command stack.
4. High-speed search
With a 1.3X reading speed and improved memory cache
and search algorithm, the search speed has been in-
creased. (See page 19, 20)
5. Enhanced special playback
This player enables the DVD and Video CD playback
speed to be changed in several ways. Slow forward and
reverse playback, scan playback and frame forward/re-
verse can be freely selected. (See page 18, 20, 21)
÷
To perform reverse slow playback, select Frame from
the REV STEP/REV PLAY page of the ADV.SETUP
MENU. Slow playback is only possible in the forward
direction with a Video CD.
6. Mouse control
Instead of the remote control unit, a PS/2* pointing de-
vice can be used to control the player if desired. This
allows selecting specific locations by the point-and-click
method. (See page 49)
* PS/2 is a registered trademark of IBM corporation.
7. Weekly timer/ power on start function
The times for power on/off and for video playback of a
disc can be set for each day within one week or within
one day. Combined with the barcode/command stack,
program playback is also possible. This player is limited
to a maximum of 24 setting at one time.
(See page 50, 58)