Filter
Top Products
82
En
Synchronized use of 2 or more players
÷
Using a single sync generator to synchronize two or more players
÷
Make sure that the terminator switch is ON on the terminal player and OFF on the other players.
÷
When applying synchronization to one player, set the terminator switch to ON.
INTERFACE CONNECTOR
AUDIO OUT
EXIT SYNC IN
BLACK BURST
COMPONENT VIDEO OUT
COMPOSITE
VIDEO
OUT
OFF ON
VIDEO 1
VIDEO 2
S-VIDEO
COMPONENT
COMPOSITE
(MONO)
AUDIO
OUT
PCM/
DIGITAL OUT
R
YP
B
P
R
L
AC IN
AUTO
NTSC
PAL
SIGNAL
GND
INTERFACE CONNECTOR
AUDIO OUT
EXIT SYNC IN
BLACK BURST
COMPONENT VIDEO OUT
COMPOSITE
VIDEO
OUT
OFF ON
VIDEO 1
VIDEO 2
S-VIDEO
COMPONENT
COMPOSITE
(MONO)
AUDIO
OUT
PCM/
DIGITAL OUT
R
YP
B
P
R
L
AC IN
AUTO
NTSC
PAL
SIGNAL
GND
INTERFACE CONNECTOR
AUDIO OUT
EXIT SYNC IN
BLACK BURST
COMPONENT VIDEO OUT
COMPOSITE
VIDEO
OUT
OFF ON
VIDEO 1
VIDEO 2
S-VIDEO
COMPONENT
COMPOSITE
(MONO)
AUDIO
OUT
PCM/
DIGITAL OUT
R
YP
B
P
R
L
AC IN
AUTO
NTSC
PAL
SIGNAL
GND
NOTE:
When you return to DVD Video playback
after text file display, playback resumes
from where you clicked on the button.
Video text retrieval
DVD.
This player enables playback of text files recorded on DVD Video discs.
With the Video Text Retrieval function, you can use the mouse to click on buttons displayed during DVD Video disc playback. This
provides text file indications corresponding to the button, either separately displayed on-screen or superimposed over a DVD still
image.
÷ The Video Text Retrieval function operates with Video Text Retrieval compatible discs. It does not operate with regular DVDs
that do not feature recorded text files.
÷ Video Text Retrieval is our original format.
External synchronizing function
DVD.
To turn on this this function, set the EXTERNAL SYNC option under the ADV. SETUP menu to OFF, and then set either NTSC or
PAL according to the type of disc to be played. Further, select NTSC or PAL of the TV SYSTEM selector on the rear panel
depending on the disc which is to be played.
Through external input of a synchronization signal (black burst), video output signals can be synchronized with external signals
on the DVD-V7300D. (During DVD disc playback.)
Through the use of this function, video switch timing can be matched, and switching can be done without causing picture
disturbance on the TV without the need for such devices as a TBC (Time Base Collector).
NOTE:
÷ When the external synchronizing function is turned on, discs other than DVD cannot be played.
÷ Locking to the sub carrier element of the black burst signal will not occur.
÷ During the approximately 5 seconds needed for locking to the external synchronizing signal, there will be video disturbance at
the video output jacks.
÷ Input the external synchronizing signal before playback of the DVD disc. Synchronization will not operate if input is done after
playback is started.
÷ In cases where two or more DVD-V7300D units are externally syncronized and their videos are started simultaneously for
frame-synchronized playback, turn off AV SYNC COMPENSATE on the ADV. SETUP menu. The external sync function works
only with DVD play: it does not work with any other operation.
Welcome To The Islands
Of Everlasting Summer!
Welcome To The Islands
Of Everlasting Summer!
No 1No 2No X
INPUT BLACK BURST
SIGNAL
✩ Cables can be found at your local audio/video dealer.
ONOFF ON