Pioneer PDP-5020FD Flat Panel Television User Manual


 
21
En
02
English
Install Your Flat Panel TV
Speaker bracket (left)
Speaker bracket (center)
Speaker cable
Speaker bracket (right)
Speaker
mounting screw
(M5 x 10 mm)
Speaker
mounting screw
(M5 x 10 mm)
Speaker mounting
screw (M5 x 10 mm)
Speaker
PDP-6020FD with the speaker installed
Black
Black
Red
Gray
Cable clamp
(PDP-5020FD)
Before connecting the speaker to the flat panel TV, unplug
the panel from the power outlet. Connecting the speaker
cable with the power cord plugged in can cause malfunction
or damage to the panel if the cable’s bare wire touches other
equipment. Plug in the power cord after connecting the
speaker.
Do not leave speaker cable wires bare and exposed at the
terminals. Exposed wires can result in an electrical short
causing malfunction or damage to the system.
Do not connect any devices to the speaker terminals other
than the speakers specified.
PDP6020FD.book Page 21 Tuesday, March 18, 2008 6:15 PM