Filter
Top Products
18
En
BEFORE USING
Remote Control Unit and Main Unit Preparations
TV SYSTEM switch
Video output changes as follows
according to the playback disc‘s
recorded format.
NTSC = PAL, PAL = NTSC conversion
is possible on Video CDs. PAL = NTSC
conversion is not possible on DVDs.
When the TV SYSTEM switch is set to
the AUTO position, the disc’s format
will be output as is. When a CD or disc
is not loaded, the previous video
output format will be selected.
About MOD. (Modulation) PAL
•SHRINK
Most models of the newly developed
countdown PAL TV system detect 50
Hz (PAL)/60 Hz (NTSC) and
automatically switch vertical
amplitude, resulting in a display
without vertical shrinkage.
•If your PAL TV does not have a V-Hold
control, you may not be able to view
NTSC disc because the picture may
roll. If the TV has a V-Hold control,
adjust it until the picture stops rolling.
On some TVs, the picture may shrink
vertically, leaving black bands at the
top and bottom of the screen. This is
not a malfunction; it is caused by the
NTSC = PAL conversion.
Position of TV
SYSTEM switch
NTSC
AUTO
PAL/LCD
Liquid crystal
display
Power off
Power off
Power on
NTSC discs
NTSC
NTSC
MOD.PAL
PAL discs
PAL
PAL
NTSC discs
NTSC
NTSC
MOD.PAL
PAL discs
NTSC
PAL
PAL
CD, No disc
NTSC
NTSC or PAL
PAL
DVD Video CD
Setting the TV SYSTEM switch
N
TSC
T
V
S
Y
S
TEM
A
UTO
P
AL
/
LCD
PDV-LC10
Note:
With the PDV-LC10, when the TV SYSTEM
switch is set to anything other than “PAL/
LCD”, the Liquid Crystal Display (LCD) is
turned off.