Filter
Top Products
21
En
BEFORE USING
English
Part Names and Functions
1 Lid
2 PHONES/DIGITAL OUT (OPTICAL)
jack
To connect stereo headphones or an
amplifier, connect the stereo minijack
or optical digital cable here.
3 Remote sensor
The remote control signals are
received here.
4 Power ON/OFF/HOLD switch
Slide the power switch to the ON/OFF
side and hold it there for at least 1
second to turn the player’s power on
and off.
The hold (accidental operation
prevention) function is turned on when
the switch is slid to the HOLD side.
Main unit front panel
Hold function
The hold function disables the control
buttons, so the currently playing picture or
sound is not interrupted even if a control
button is pressed accidentally during
playback. “HOLD” appears on the main
unit’s display window if a control button is
pressed while the hold function is on.
Only the power button on the remote
control unit functions when the hold
function is on.
5 Power indicator
Off: The power is off.
Turn on the power using the main
unit’s power switch.
Red: The power is set to the standby
mode.
Turn on the power using the power
switch on the main unit or the power
button on the remote control unit.
Green: The power is on.
DIGITAL OUT (OPTICAL)
PHONES
HOLDON/OFF
COLOR BRIGHT MONITOR
4
1 2 3
5