Filter
Top Products
16 Chapter 2
Graphics contained within this publication are for representation only.
Chapter 2 17
Using the Remote Control
Chapter 2: Using the Remote Control
The Buttons on the Remote Control
(0-9) Number Buttons Enter channel numbers and time settings directly
through the remote control.
To enter a one-digit channel, enter a zero rst. To enter a two-digit channel,
press the two digits. To enter a three-digit channel, press and hold the “1”
button until “1” and two dashes (– –) appear, then add the second two digits.
Example: to tune to channel 123, press and hold 1 until “1– –” appears, release
the 1 button and then press 2 and 3.
ANTENNA If you program the AUX•HD button to control a VCR, this button
works as a TV/VCR button for some VCRs when the remote is in AUX•HD
mode. If you program the AUX•HD button to control a satellite receiver, this
button works as a TV/SAT button for some satellite receivers when the remote
is in AUX•HD mode.
Arrows Used to highlight different items in the TV or DVD menu and to
adjust the menu controls. The up and down arrows move the PIP window when
no menus are on the screen.
When watching TV without the PIP window or menu system in use, the left and
right arrows (ZOOM –and ZOOM +) change the current format of the screen
(4:3, Zoom 14:9, Zoom 16:9, Zoom 16:9 ^/v, Cinerama, regular mode 16:9).
AUX•HD Puts the remote in AUX•HD mode. As a default, this button controls
some models of RCA HDTV Tuners. It can also be programmed to operate
some brands of an additional remote-controllable components. The Autotuning
feature for this button works only with HDTV tuners (see page 28 for more
information on Autotuning).
CC / SUBTITLE In TV mode, brings up the Closed Caption menu. In DVD
mode while a disc is playing, brings up the information banner with the subtitle
icon highlighted.
CH + or CH - Scan up or down through the current channel list. Press once to
change the channel up or down; press and hold to continue changing channels.
In DVD mode while a disc is playing, CH+ advances to the next chapter; CH-
goes to the preceding chapter.
CLEAR Removes any menu or display from the screen and returns you to
normal viewing. Also exits PIP or POP if no menu is displayed.
DVD Puts the TV/DVD and remote in DVD mode. Also displays the current
DVD status. Turns on the TV/DVD in DVD mode if it's off.
GO BACK In TV mode, returns you to the previous channel. In DVD mode,
returns to the previous screen.
GUIDE In TV mode, brings up the Channel Guide menu. In DVD mode,
brings up the DVD guide (if available).
INFO In TV mode, makes the channel banner appear and disappear. In DVD
mode, makes the info banner appear and disappear.
Indicator Indicates the programming mode when programming the remote
to control other components. The indicator lights up when you press a valid
button on the remote. It ickers when the remote batteries are low and you
press a button.
INPUT Accesses the available video input channels (VID1, VID2, FRNT, CMP1,
and DVI). Press the CH+ or CH- button to resume TV viewing.
Indicator