Filter
Top Products
16 Chapter 2
Graphics contained within this publication are for representation only.
Chapter 2 17
Using the Remote Control
Chapter 2: Using the Remote Control
Note:
The DVD and AUX•HD buttons also turn on
most RCA, GE, and Proscan products.
Tip
To turn off all the RCA, GE, and Proscan
components that are connected to the TV,
press ON•OFF twice within two seconds.
This feature only works with most RCA, GE,
and Proscan products.
MENU In TV mode, makes the TV Main menu appear and disappear. In DVD
mode, makes the reduced TV menu appear and disappear.
MUTE Reduces the TV’s volume to its minimum level. Press again to restore
the volume.
OK / FREEZE When in the menu system, selects highlighted items. When
watching TV without the PIP window or menu system in use, the OK/FREEZE
button freezes the picture until you press any button on the remote to resume
normal TV viewing. The FREEZE feature automatically times out after a short
time. Please note that when you "unfreeze" you go back to live programming
(skipping any programming that occurred during the freeze).
Note: The FREEZE feature does not work on signals from the DVI-HDTV,
CMP1 input in progressive scan (480p) or HDTV (1080i) modes.
Do not use the Freeze feature for an extended period of time. This can
cause the image to be permanently imprinted on the picture tube. Such
damage is not covered by your warranty. Press any button to unfreeze the
picture at any time.
ON•OFF When in TV mode, turns the TV on and off. If in AUX•HD mode
and programmed, turns the component on and off.
PIP / AGAIN When the remote in TV mode, press this button once to bring
up the small picture-in-picture (PIP) window. Press it again to bring up the
picture-outside-picture (POP) windows. Press it a third time to remove POP. (See
Chapter 4 for more information about using PIP.)
When the remote is in DVD mode, this button accesses the Scene Again™
feature, which replays the last several seconds (approximately 10) of the DVD
disc you're playing. The Scene Again feature does not work with VCDs or mp3
les.
PIP CH – / DVD ZOOM When the remote is in TV mode, this button changes
the channel in the PIP window. When the remote is in DVD mode, use this
button to change the Zoom mode for discs with video in the 4:3 aspect ratio.
PIP CH + / OPEN•CLOSE When using PIP or POP, changes the channel in the
PIP window. In DVD mode, this button opens or closes the disc tray.
PRESETS / DISC MENU In TV mode, displays the Picture and Sound preset
settings. Use the up and down arrow buttons to highlight either Picture or Sound
settings. Use the left and right arrow buttons to change to a different Picture or
Sound preset. In DVD mode while a disc is playing, brings up the current disc's
menu (if available).
RECORD When the remote is in AUX•HD mode and programmed to control a
recording device (such as a VCR), this button tells the device to start recording.
The recording device must be connected to the component you’re watching in
order for that device to record the program you’re watching.
REVERSE, PLAY, FORWARD, STOP, PAUSE In DVD mode, these buttons
provide reverse, play, fast forward, stop and pause the disc. If programmed, they
also provide transport control for some remote-controllable VCRs, DVD players,
tape decks, and CD players.
SKIP In TV mode, press once before changing channels and the TV will wait
30 seconds before returning you to the original channel. Press repeatedly to add
more time.
TV Turns on the TV and puts the remote in TV mode. Also displays the channel
banner.
VOL – or VOL + Decreases or increases the TV’s volume.
Tip
The indicator ashes when the remote
batteries are low and you press a button on
the remote.
A warning banner may also appear on the
screen when you press a remote button and
your batteries are low.