English - 35
System Setup
Dynamic Compression
This is only active when a Dolby Digital signal is
detected.
•
On : When movie soundtracks are played at low
volume or from small speakers, the system can apply
appropriate compression to make low-level content
more intelligible and prevent dramatic passages from
getting too loud.
•
Off : You can enjoy the movie with standard Dynamic
Range.
5
Select the desired item(PCM, Bitstream, DTS-
Off, DTS-On, Dynamic Compression-Off or
Dynamic Compression-On) using the
…†
buttons
Then press the ENTER or √ button.
Audio
DVD-Recorder
No Disc
Timer Rec.
Setup
Digital Output : PCM
√√
DTS : Off
√√
Dynamic Compression
On
√√
Off
On
RETURNENTERMOVE
EXIT
This allows you to set up the TV screen settings.
TV Aspect
1
With the unit in Stop mode/No Disc mode, press
the MENU button on the remote control.
2
Select Setup using the
…†
buttons, then press
the ENTER or √ button.
3
Select Video using the
…†
buttons, then press
the ENTER or √ button.
4
Select TV Aspect using the
…†
buttons, then
press the ENTER or √ button.
5
Select the desired item(4:3 Letter Box, 4:3 Pan-
Scan or 16:9 Wide) using the
…†
buttons.
Then press the ENTER or √ button.
Video (Display) Setting
DTS
•
On : Outputs DTS bitstream. (via Digital Audio
Output)
Select DTS when connecting to a digital amp
with a DTS decoder.
•
Off : Doesn’t output DTS bitstream .
•
When DTS soundtrack is played, sound is not output
from the Analog Audio Output.
Audio
DVD-Recorder
No Disc
Timer Rec.
Setup
Digital Output : PCM
√√
DTS : Off
√√
Dynamic Compression:
On
√√
Off
On
RETURNENTERMOVE
EXIT
2
Select Setup using the
…†
buttons, then press
the ENTER or √ button.
3
Select Audio using the
…†
buttons, then press
the ENTER or √ button.
4
Select the sub menu(Digital Output, DTS,
Dynamic Compression) using the
…†
buttons,
then press the ENTER or √ button.
Select the item that matches the audio connection
you’ve selected on pages 23-25(Method 1, 2 and3).
Digital Output
•
PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM if your amplifier system supports stereo
and/or Dolby Prologic.
•
Bitstream : Outputs Bitstream.
Select Bitstream if your amplifier system supports multi
channel digital audio surround decoding such as Dolby
Digital and/or DTS.
Audio
DVD-Recorder
No Disc
Timer Rec.
Setup
Digital Output : PCM
√√
DTS : Off
√√
Dynamic Compression: On
√√
Audio
DVD-Recorder
No Disc
Timer Rec.
Setup
Digital Output : PCM
√√
DTS : Off
√√
Dynamic Compression:
On
√√
PCM
Bitstream
RETURNENTERMOVE
EXIT
RETURNENTERMOVE
EXIT