Filter
Top Products
36 - English
System Setup
HDMI/DVI Resolution
This setting is used when the unit is connected by
HDMI or DVI with Display devices (TV, projector,etc).
• 480p : 720 x 480
• 720p : 1280 x 720
• 1080i : 1920 x 1080
• 1080p : 1920 x 1080
Connect the DVD-R160 to your TV via HDMI or
DVI. Set your TV's input to HDMI or DVI.
• Press the P.SCAN button while the unit is in stop
mode to select the output resolution.
- If your TV is connected the HDMI or DVI cable, the
output resolution mode changes in the following
sequence each time you press the P.SCAN button:
➞
480p
➞
720p
➞
1080i
➞
1080p
- If the DVD Recorder is connected to your TV with
Component cables(no HDMI/DVI cable connected),
the output resolution mode toggles between
480p/480i.
TV Aspect
: 16:9 Wide
√√
Input Level : Darker
√√
Black Level : 7.5 IRE
√√
3D Noise Reduction
: Off
√√
HDMI/DVI Resolution
: 480P
√√
DivX(R) Registration
√√
480P
720P
1080i
1080p
Video
DVD-Recorder
No Disc
Timer Rec.
Setup
RETURNENTERMOVE EXIT
■
Black level function is not available in
the progressive scan mode.
■
IRE: Short for the Institute of Radio
Engineers. An IRE unit is a relative unit
of measure equaling 1/140th of the
peak-to peak (p-p) video amplitude.
NOTE
3D Noise Reduction
• On : Provides a cleaner picture through noise
reduction (for recording).
• Off : Normal
TV Aspect
: 16:9 Wide
√√
Input Level : Darker
√√
Black Level : 7.5 IRE
√√
3D Noise Reduction
: Off
√√
HDMI/DVI Resolution
: 480P
√√
DivX(R) Registration
√√
Off
On
Video
DVD-Recorder
No Disc
Timer Rec.
Setup
RETURNENTERMOVE EXIT
Input Level
Adjusts the level of the input signal.
• Darker : If you feel the screen is too light and you want
to make the screen darker.
• Lighter : If you feel the screen is too dark and you
want to make the screen lighter.
Black Level
Adjusts the black level of the screen.
• 0 IRE : Select this when you want a darker screen.
• 7.5 IRE : Select this when you want a lighter screen.
TV Aspect
: 16:9 Wide
√√
Input Level : Darker
√√
Black Level : 7.5 IRE
√√
3D Noise Reduction
: Off
√√
HDMI/DVI Resolution
: 480P
√√
DivX(R) Registration
√√
Darker
Lighter
Video
DVD-Recorder
No Disc
Timer Rec.
Setup
RETURNENTERMOVE EXIT
TV Aspect
: 16:9 Wide
√√
Input Level : Darker
√√
Black Level : 7.5 IRE
√√
3D Noise Reduction
: Off
√√
HDMI/DVI Resolution
: 480P
√√
DivX(R) Registration
√√
0 IRE
7.5 IRE
Video
DVD-Recorder
No Disc
Timer Rec.
Setup
RETURNENTERMOVE EXIT
If you have a 4:3 standard TV
• 4:3 Letter Box : Select when you want to see the
total 16:9 ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars will
appear at the top and bottom of the screen.
• 4:3 Pan-Scan : Select this for a conventional size TV
when you want to see the central portion of the 16:9
screen. (Extreme left and right side of movie picture
will be cut off.)
If you have a wide screen TV or 4:3 standard TV
with a wide-screen mode
• 16:9 Wide : You can view the full 16:9 picture on your
widescreen TV.
Video
DVD-Recorder
No Disc
Timer Rec.
Setup
TV Aspect
: 16:9 Wide
√√
Input Level : Darker
√√
Black Level : 7.5 IRE
√√
3D Noise Reduction
: Off
√√
HDMI/DVI Resolution
: 480P
√√
DivX(R) Registration
√√
RETURNENTERMOVE EXIT
4:3 Letter Box
4:3 Pan-Scan
16:9 Wide