Filter
Top Products
English - 21
Connecting & Setting Up
Case 2 : Connecting to an S-Video
output jack
1. Connect an S-Video cable (not included) between
the S-VIDEO OUT jack on HDD & DVD
RECORDER and S-VIDEO INPUT jack on your TV
(or AV amplifier).
•
You will enjoy high quality images.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on HDD & DVD RECORDER
and AUDIO IN jacks on TV (or AV amplifier).
(See pages 22~23)
Case 3 : Component Video output
jacks
1. Connect Component video cables(not supplied)
between the COMPONENT OUT(Y,P
B
,P
R
) jacks on
HDD & DVD RECORDER and COMPONENT
IN(Y,P
B
,P
R
) jacks on your TV.
•
You will enjoy high quality and accurate colour
reproduction images.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the HDD & DVD
RECORDER and AUDIO IN jacks on TV (or AV
amplifier).
(See pages 22~23).
3. After connecting, refer to the pages 41~43.
green
■
Make sure that the colour coded
connections match. The Y, P
B
, P
R
component output jacks of your HDD &
DVD RECORDER must be connected to
the exact corresponding component input
jacks on your TV.
■
Progressive setting is only available when
the Video Out is set to Component.
(See pages 41~43)
NOTE
red
blue
green
blue
red
< DVD-HR733 >
< DVD-HR733 >
HR733-HR738_XEU_01~58 6/23/06 10:18 AM Page 21