Filter
Top Products
28 - English
System Setup
4
Auto channel scan will be started.
5
After auto channel scan is completed, auto clock
setting will be started automatically in 10 seconds.
If you want to start auto clock setting immediately,
press OK button. If you do not want to do auto
clock setting, press CANCEL or MENU button.
6
Wait until current date and time are displayed
automatically. If you want to exit auto clock setting,
press MENU button.
Plug & Auto Setup
Your HDD & DVD RECORDER will automatically set itself up
when it is plugged in for the first time. TV stations and clock
will be stored in memory. The process takes a few minutes.
Your HDD & DVD RECORDER will then be ready for use.
1
Connect the RF cable as indicated on page 19.
(Connecting Your HDD & DVD RECORDER to the
TV Using the RF Cable and scart cable.)
(HR738 Only)
To use HDMI cable, make the Audio/Video
connection before plugging in the power cord or
after finishing the “Plug & Auto Setup.”
Do not connect the HDMI cable while the
“Plug & Auto Setup” is progressing.
2
Plug the HDD & DVD RECORDER into the mains.
“AUTO” in the front panel display flickers.
3
Press the OK button to start the auto setup.
Auto channel scan completed successfully.
Press the [OK] button to auto clock set.
Yes No
Please wait. Now setting the clock.
If you want to exit clock setting,
press the [MENU] button.
Auto Setup
Please wait.
68%
Auto setup will be started.
Yes No
HR733-HR738_XEU_01~58 6/23/06 10:18 AM Page 28