Filter
Top Products
English - 23
Connecting & Setting Up
Case 3: Connecting to an AV
amplifier with a digital output jack
If your AV amplifier has a Dolby Digital, MPEG2
or DTS decoder and a digital input jack, use this
connection. To enjoy Dolby Digital, MPEG2 or
DTS sound, you will need to set up the audio
settings.
According to your amplifier, connect to an optical
cable or a coaxial cable.(See pages 38~39)
Rear(L)
Front(L)
Subwoofer Centre
Front(R)
Rear(R)
or
Connecting HDMI/
DVI to a TV (HR738 Only)
If your TV has a HDMI/DVI input, connect HDMI/DVI
Adapter cable to a TV. You will enjoy the best quality
images and sounds.
•
Case 1 : Connecting to a TV with HDMI Jack
•
Case 2 : Connecting to a TV with DVI Jack
Case 1 : Connecting to a TV with
HDMI Jack
• Using the HDMI cable connect the HDMI OUT
jack on the rear of the HDD & DVD RECORDER to
the HDMI IN jack of your TV.
• Press the input selector on your TV remote control
until the HDMI signal from the HDD & DVD
RECORDER appears on your TV screen.
< DVD-HR733 >
< DVD-HR738 >
HR733-HR738_XEU_01~58 6/23/06 10:18 AM Page 23