38 - English
System Setup
3
Press the
…†
buttons to select Audio, then press
the OK or √ button.
4
Press the
…†
buttons to select the desired audio
option, then press the OK or √ button.
5
Press the
…†
buttons to select the desired item,
then press the OK or √ button.
■
Press the RETURN or œ button to return
to the previous menu.
Press the MENU button to exit the menu.
NOTE
Setting up the Audio
Options
1
With the unit in Stop mode, press the MENU
button.
2
Press the …† buttons to select Setup, then press
the OK or √ button.
You can connect the HDD & DVD RECORDER to an
external amp or Home theatre.
Allows you to setup the Audio device and sound status
depending on the audio system in use.
You can also set NICAM mode.
HDD
Library
Disc Manager
Programme
Setup
HDD & DVD RECORDER Setup
System √
PVR Option √
Language √
Audio √
Video √
Parental Lock √
MOVE SELECT RETURN EXIT
Setup
System √
HDD
Library
Disc Manager
Programme
Setup
HDD & DVD RECORDER Audio
Digital Output :PCM √
DTS : Off √
DRC :On √
NICAM : Off √
V-Mode Compatibility :Off √
MOVE SELECT RETURN EXIT
Setup
Digital Output :PCM √
4
Press the …† buttons to select EP Mode Time,
then press the OK or √ button.
5
Press the …† buttons to select the desired Time,
then press the OK or √ button.
HDD
Library
Disc Manager
Programme
Setup
HDD & DVD RECORDER PVR Option
CM Skip Time : 15 Sec √
EP Mode Time :6 Hours √
MOVE SELECT RETURN EXIT
Setup
EP Mode Time : 6 Hours √
6 Hours
8 Hours
6 Hours
Digital Output
1. PCM : Select this when your equipment is not
decode Dolby Digital compatible.
2. Bitstream : Outputs Dolby Digital (or MPEG-2)
audio as bitstream. Select this
when your AV receiver or AV
amplifier has a Dolby Digital (or
MPEG-2) Decoder.
■
Digital output setting is equally applied to
both Dolby Digital and MPEG-2 audio.
LPCM sound track is always outputted as
PCM. It has no relation with Digital
Output setting.
■
Be sure to select the correct Digital
Output or you will hear no sound or a
loud noise.
NOTE
HR733-HR738_XEU_01~58 6/23/06 10:18 AM Page 38