Samsung SHR-5042 DVR User Manual


 
16_ live
live
OPERATING THE SYSTEM
Turn on the power and the following Samsung logo
appears.

Perform the initialization job to operate the system after
the logo screen has appeared.

The live video appears if the initialization process is
normally completed.

It may take about 40 to 60 seconds until the live video
appears.

When the live video appears, the system setup
environment set previously will be maintained; and
if the system has been re-started, the live video will
appear and you can start recording.

When installing a new HDD, it may require much
more time until the live video appears due to the
HDD initialization time.

If the live video does not appear, please check
whether the internal and external connections
are normal. If the problem persists, please
contact the place where you have purchased
this product.
LIVE SCREEN MODE
Live screen icons
The live screen icon indicates the setup and function
status of each screen.
: Recording Icon
It indicates the states of REC recording / Event (motion +
alarm) / Continuous recording.
: Recording Video Size Icon
It shows the respective recording sizes of Large/Normal/
CIF.

Large: Full D1 - (NTSC) 704X480
(PAL) 704X576

Normal: Half D1 – (NTSC) 704X240
(PAL) 704X288

CIF: CIF - (NTSC) 352X240
(PAL) 352X288
CAM_01
CAM_01
V.Loss
SHR-5042_Eng_02.indd 16 2008-01-25 오전 9:31:13