Filter
Top Products
103
CHAPTER 7
Settings, preferences, upgrades, and extras
7
7
NOTE 1
If you select the IR remote, your RF remote will be disabled. If you have a RF remote, press the
[Cancel] button in the message window that appears after this operation.
NOTE 2
If you select the RF remote, your IR remote will be disabled.
If you have a RF remote, it is recommended to set the RF remote control ID first and change this
menu. Press the [Cancel] button in the message window that appears after this operation.
7
You may select [Done] or [Cancel] in the warning message window.
Select the [Done] and press the [Select] button to complete selection of the remote control
to use.
8
When you have finished setting the remote control type screen, select the on-screen Back
button.
NOTE
The factory setting for the remote control type is IR & RF.
If you set the remote control type to RF and use the IR remote control only, the IR remote control may
not work.
Use the keys in the front panel to enter the menu and set the remote control type as IR & RF.