Filter
Top Products
41
CHAPTER 3
Setting up and connecting
3
3
2
Highlight the Set Dish menu item, then press the SELECT button. The Set Dish menu appears.
3
Highlight the Select Dish Type menu item, then press the SELECT button.
The Select Dish Type screen appears.
4
Use the right-arrow button on your remote control to highlight
the Dish Type option on the Select Dish Type screen.
5
Use the up- and down-arrow buttons on your remote control
to display the dish type you are using (Round, Oval-2, Oval-3,
or No Dish). As you display each dish type, the on-screen
pictures update showing you what each of these dish types
look like. If you plan to use your DIRECTV
®
HD Receiver for
local off-air or cable TV programs, but do not plan to receive
DIRECTV
®
programming, select No Dish.
6
A message appears warning you that your DIRECTV
®
HD Receiver needs to reboot (turn itself
off and on) for the Dish Type setting to take effect. When you have displayed the correct dish
type, use the right-arrow button on your remote control to highlight the on-screen SELECT
button, then press the SELECT button.
7
To change the Dish Type to the new setting, highlight the
on-screen SELECT button, then press the SELECT button.
To leave the Dish Type setting unchanged, highlight the
on-screen Cancel button, and press the SELECT button.
After you select the on-screen SELECT button, the DIRECTV
®
HD Receiver will reboot.
If you selected No Dish, the DIRECTV
®
HD Receiver will perform an auto-scan to put your
cable and off-air channels into its memory so you can tune them and see them in the
on-screen Guide.