Filter
Top Products
FUNCTION
34
CHECKING OF ALARM RECORDING
ALARM COUNTER MEMORY
33
ALARM FUNCTIONS
The alarm functions include the alarm recording, alarm checking alarm clear, and alarm
counter memory. (Refer to Alarm Recording, page 32)
1
Press the MENU button
1. Place the
❿!
sign in the “ALARM
REC SETUP/RECALL” position
using the SHIFT
❷❷
button.
2. Press the SHIFT
❿❿
button, then
the “ALARM RECALL” displays.
3. Press the MENU button after
checking.
•
When an alarm recording is not
made, there is no display on the
screen display.
•
The ALARM RECALL screen
displays the “6” most recent
alarm recorded events with the date
and time of each.
•
If the alarm is recorded at 12:00,
13:00, 15:00, 17:00 and 19:00 on
December 25, 2001.
Display of operating time
• When the front display indicates , press the
COUNTER button twice.
The operating time is then indicated on the front display.
example) When operated for 11 hours.
• If the counter button is not entered within 5 seconds
when checking the operating time, the status of the
front display returns to the state prior to checking the
display of operating time.
REFERENCE
The alarm sounds five times in the following cases;
• When a tape without an erasure prevention tab is inserted.
– When the series signal is entered. (long sound)
– When the alarm signal is entered.
– When the record button is pressed.
– When pressing TIMER button.
• When pressing the REC button with the tape ejected.
• When the alarm signal is entered during alarm recording.
The alarm sounds continuously in the following cases;
• When the tape arrives at its end in the recording mode.
• When the alarm signal is entered for alarm recording.
–
When the alarm recording is ended the alarm is released.
– The alarm is released when pressing any button
– When the alarm signal is entered with the tape ejected.
(long sound)
Auto repeat recording
• When the rewinding is completed after the tape arrives at
its end, recording is restarted.
(The alarm sounds during rewinding only.)
• If alarm recording is made, tape is ejected.
REFERENCE
HOUR
11
Press the CNT. MEMO
• Press the CNT. MEMO button twice, then
the front display indicates "A. MEMO".
22
Turn the SHUTTLE ring
clockwise or counterclockwise
• When turning the shuttle ring the tape
moves forward (backward). When it
arrives at the alarm recording in only
L3H mode encounted first, it pauses for
5 seconds and then stops.
CNT MEMO
A.MEMO
ALARM CLEAR
1
example) When the alarm recording is made
at No. 12.
Press the COUNTER button
• A-12 is indicated at the counter position
on the front display.
• From " ", the "12" indicates the times
of alarm recording.
• It is possible to display up to " "
• When the alarm recording is made, the
on " " the front display flashes.
2
Press the CLEAR button
• The counter position on the front display
indicates " ".
• The " " is turned off.
• When pressing the CLEAR button while
the alarm check screen is displayed, all
the data and time in memory are
erased.
COUNT
CLEAR
ALARM RECALL
YEAR DATE TIME
1 2001 12/25 19:00:00
2 2001 12/25 17:00:00
3 2001 12/25 15:00:00
4 2001 12/25 13:00:00
5 2001 12/25 12:00:00
6
END:MENU
F
.F
R
E
W
R
E
W
F
.F
1
1
2
22
11
P
O
W
E
R
PLAY
REC
P/STILL
REC CHECK
STOP/EJECT
M
E
N
U
V
-L
O
C
K
T
R
A
C
K
I
N
G
/
S
E
T
TIME MODE
REC LOCK
R
E
V
A
U
D
I
O
O
N
C
O
U
N
T
C
N
T
.M
E
M
O
C
L
E
A
R
R
E
S
E
T
TIMER
R
E
C
L
O
C
K
S
H
IF
T
R
E
W
F
.
F
01671A SVR-24JP/960JP-E3 12/7/01 4:06 PM Page 34