Samsung SVR-24JP VCR User Manual


 
44
MAINTEN-
ANCE
43
SPECIFICATIONS
Recording Type
Rotation head azimuth recording type, luminance signal FM recording type,
color signal down converted direct recording type
Signal Type PALtype
Tape Speed 23.39 mm/sec (L3H mode; E-180)
Applicable Video Tape type video tape
Recording Time L3H/L8H/L12H/L24H/000H : SVR-24JP
L3H/L8H/L12H/L24H/36H/48H/72H/120H/168H/240H/480H/
960H/000H : SVR-960JP
Rewinding Time Approximately 100 seconds (E-180 tape, In case of rewind time)
Image Input, output 1.0 Vp-p (unbalanced) 75 ohm
Image S/N Above 42dB (L3H recording)
Sound Input -8dB (L3H mode)
Sound Output -8dB (L3H mode)
Sound S/N Above 40 dB (L3H recording)
Characteristics of 100-5,000Hz (L3H recording)
Sound Frequency
Rated Voltage AC100~240V
Rated Frequency 50~60Hz
Power Consumption 16W
Ambient Temperature 5˚C ~ 40˚C (41˚F ~ 104˚F)
Installation Conditions Operating position-Horizontal
Relative humidity: Below 80%
Dimensions 430mm(W) x 97mm (H) x 294mm (D)
Weight 4 Kg
Accessories User's manual
BEFORE REQUESTING SERVICE
1
Careless handling by the user is not covered.
Strong impacts.
Video head damage due to improper cleaning.
Foreign substances entering the unit.
Unauthorized internal modification by the user.
Use in high or low temperature, high humidity, or smoky areas.
Operation other than described in the instructions.
Use of power sources other than specified for the unit.
2
Operating Time Counter
Note that it displays a maximum time of 9999.
Refer to Alarm Function for proper operation.
The table of Cleaning Lubrication and replacement time
about principal parts
This table is for normal temperature and humidity. It is necessary to check more frequently under
extreme conditions.
The life of the cylinder assembly depends on the operation conditions.
If you have any questions. Please contact an authorized technician.
: Cleaning : Check & replacement as necessary : Add Oil : Change
*Remark
The clean the parts, use patch and alcohol(solvent).
After cleaning, use the video tape after alcohol has dired completely.
We recommend to use oil [EP-56] or solvent.
One or two drops of oil should be applied after cleaning with alcohol.
Apply oil periodically (Apply oil after cleaning)
Applying oil excessively may cause malfunction.
500 1000 2000 3000 4000 5000 6000 8000 10000
TAPE GUIDE POSTS ▲▲▲▲▲▲▲▲▲
CYLINDER ASSY ▲●●●●●●●
PINCH ROLLER ▲▲▲▲▲●●●
CAPSTAN MOTOR ▲▲▲▲▲▲▲▲
BELT PULLEY ●●●●●●
SOLENOID BRAKE UNIT ●●
01671A SVR-24JP/960JP-E3 12/7/01 4:06 PM Page 44