Filter
Top Products
16
SOUND 1/2
SOUND 1/2
NICAM stereo sound reception:
1
Press ANALOG MENU, the menu will appear on the
screen.
Press B or A to select
(AUDIO) menu.
Press C or D to select NICAM, then press ENTER.
Press B or A to select AUTO or OFF.
Select OFF if you want to revert to standard mono FM
audio reception.
2
Press EXIT to return to the normal screen.
When NICAM reception is available, one of the
following indications will be displayed.
‘NICAM ST’ illuminates for approx. 4 seconds
when a NICAM STEREO broadcast signal is
received.
‘NICAM M1’ illuminates for approx. 4 seconds
when a NICAM MONO A broadcast signal is
received.
‘NICAM M1/M2’ illuminates for approx. 4
seconds when a NICAM MONO A and
MONO B broadcast signal is received.
This will be displayed for approx. 4 seconds
when ‘NICAM OFF’ is selected in the menu
screen.
Stereo reception
‘STEREO’ illuminates for approx. 4 seconds
when a STEREO broadcast signal is received.
Adjusting the Nicam stereo sound
Pressing AUDIO alternates between the two different audio channels (when
applicable).
NICAM 2-channel sound reception
EXIT : END MENU: RETURN
NICAM AUTO
BASS 25
TREBLE 25
BALANCE 0
HDMI AUDIO HDMI
RESET
AUDIO menu
EXIT : END MENU: RETURN
NICAM AUTO
BASS 25
TREBLE 25
BALANCE 0
HDMI AUDIO HDMI
RESET
AUTO
Adjusting the NICAM stereo sound
The built-in tuner can
receive and distinguish
NICAM Stereo
broadcasts
automatically,
provided the NICAM
setting in the menu is
set to ‘AUTO’.
Note:
• Sometimes if reception is
poor, the NICAM stereo
sound may not be received
correctly. In case of 2
channel sound reception,
you can select the desired
sound with AUDIO.
NICAM M1 / M2
50A0201A_p16-19.p65 9/12/07, 4:56 PM16