Filter
Top Products
6
EXIT : END MENU: RETURN
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
16:9
SETUP menu
5
Connecting to a DVD player or other AV device with Component
Video outputs
YPbPr
IN
IN
HEAD PHONE
C.I.CARD
AUDIO
L
L
Pb
OUT
OUT
DVB-T DIGITAL
AUDIO
OUT
COMPONENT
Pr
Y
R
R
(MONO)
AUDIO
VIDEO
S-VIDEO
AV 2
(MONO)
If your DVD player (or other device) has Component Video output sockets, use a
suitable set of leads (RCA/Phono) to connect these to the Component Video
inputs on this TV as shown - it can greatly enhance the picture quality and
performance. Please remember that you will also need to connect separate leads
(RCA/Phono) for the audio signals. To view this source, select the COMPONENT
input mode (see page 4).
6
Selecting the setting for the SCART socket
1 Press ANALOG MENU, the menu will appear on
the screen. Press B or A to select
(SETUP) menu.
Press
CC
CC
C or
DD
DD
D
to select AV1 OUTPUT, then press
ENTER.
2 Press B or A to select TV or MONITOR, then press
ENTER.
TV: Outputs the last channel position
selected on RF.
MONITOR: Shows the picture displayed on the TV-
screen.
3 Press EXIT to return to the normal screen.
Note:
• The Component Video
inputs on this unit can
accept both interlaced
signals (PAL: 576i/1080i
or NTSC: 480i/1080i) and
progressive signals (PAL:
576p/720p or NTSC:
480p/720p).
EXIT : END MENU: RETURN
AV1 OUTPUT TV
AV COLOUR
AUTO
REC SCREEN STATUS
OFF
TV
TV (Back side view)
Audio lead (not supplied)
Video lead (not supplied)
Audio outputComponent output
To COMPONENT IN
Connection to other equipment
50A0201A_p04-09.p65 9/12/07, 4:54 PM6