Sansui TV19PL120DVD Flat Panel Television User Manual


 
49
Customizing The Function Settings
Picture Mode
There are two types of source content in pictures recorded in DVD video discs:
film content (pictures recorded from films at 24 frames per second) and video
content (video signals recorded at 30 frames per second). Make this selection
according to the type of content being viewed.
Auto: Select this selection normally.
The DVD player automatically detects source content, film or video of
playback source, and converts that signal in an appropriate method.
Film: The DVD player converts film content pictures appropriately. Suitable for
playback of film content pictures.
Video: The DVD player filters video signal, and converts it appropriately.
Suitable for playback of video content pictures.
Note:
Depending on the disc, pictures may be cut off or doubled. In this case, select
“Video”.
JPEG Interval
You can continuously playback all JPEG files automatically.
After the selection below, the disc will start playback on JPEG files which have
been recorded.
Off: Plays back one file at a time.
5 Seconds: Plays back images in the form of a slide show at 5 second
intervals.
10 Seconds: Plays back images in the form of a slide show at 10 second
intervals.
15 Seconds: Plays back images in the form of a slide show in 15 second
intervals.
Night Mode
Night Mode enables you to control the dynamic range so as to achieve a
suitable sound for your equipment.
Off: It plays back at the recording level on the
disc.
On: Loud sound such as explosion is toned down
slightly when played back. This is suitable
when it is connected to a stereo.
Note:
This function works only when the disc recorded with Dolby Digital is played
back.
The level of Night Mode may differ depending on DVD video disc.
Digital Out
You can select the digital output sound format corresponding to your system
connection.
Off: There is no sound output from DIGITAL AUDIO OUT jack.
PCM:Change Dolby Digital to PCM for the output.
Select when connected to a 2 channel digital stereo amplifier.
Bitstream: Disc audio bitstream data will be output.
Note:
Even if you select “Bitstream”, MPEG Audio will be output in PCM format.
Parental : Off
Set Password
Output : Interlace
DivX(R) VOD
Menu : English
Subtitle : English
Audio : English
E.B.L. : Off
TV Screen : 4:3
Display : On
Picture Mode : Auto
JPEG Interval : 5 Seconds
Screen Saver : On
Night Mode : Off
Digital Out : PCM
50A0201A_p46-49.p65 9/12/07, 4:59 PM49