Filter
Top Products
34
To pause playback (still mode)
Press
during playback.
To resume normal playback, press PLAY (
).
• The sound is muted during still mode.
To stop playback
Press
.
To remove the disc
Press
.
Remove the disc after the disc comes out.
Note:
• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or
“Parental Error” will appear on the TV screen according to the type of loaded
disc. In this case, check your disc again (see pages 32 and 50).
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label backwards (i.e. the wrong way),
“Reading” will appear on the display for a few minutes and then “Incorrect
Disc” will continue to be displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the
PBC is on. To turn off the PBC, see page 32.
• Some playback operations of DVDs may be intentionally fixed by software
producers. Since this unit plays DVDs according to the disc contents the
software producers designed, some playback features may not be available.
Also refer to the instructions supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• In many instances, a menu screen will appear after playback of a movie is
completed. Prolonged display of an on-screen menu may damage your
television set, permanently etching that image onto its screen. To avoid this, be
sure to press POWER (
) on your remote control once the movie is
completed.
• There may be a slight delay between the button is pressed and the function
activates.
Playing a disc
50A0201A_p32-37.p65 9/12/07, 4:58 PM34