Filter
Top Products
7
PC/HDMI
AUDIO
PC MONITOR
HDMI
Use a PC-VGA lead (not supplied) to connect your PC to this unit. Plug the lead
carefully not to break or bend the contact inside of plug.
Select PC input
Press INPUT SELECT and press
CC
CC
C or
DD
DD
D
to select
PC, then press ENTER. PC appears on the TV
screen.
Note:
• If there is no video signal from the computer when the unit is in PC mode,
‘NO SIGNAL’ will appear on the TV-screen.
• See next page for PC mode menu.
Monitor Display modes
MODE Resolution Refresh rate
VGA 640x480 60Hz
VGA 720x400 70Hz
SVGA 800x600 60Hz
XGA 1024x768 60Hz
WXGA 1280x720 60Hz
WXGA 1280x768 60Hz
WXGA 1360x768 60Hz
(according to Graphic card)
PC Connection
PCs are usually sup-
plied with a ‘normal’
CRT monitor (Cathode
Ray Tube).
Before you connect this
unit to your PC, change
the adjustment of your
PC’s graphic card.
Otherwise the picture
may not appear cor-
rectly on the unit. Turn
on your PC (still with
your old Monitor) and
select under 1360 x
768 for on-screen
graphic resolution.
Select under 60 Hz for
on-screen refresh rate.
Switch off your PC,
then connect it to this
unit while both items
are still switched off.
Note:
•
Digital PC-connection via
HDMI input is not supported.
If you try to connect your PC
digitally anyway, the TV-
operation might freeze. TV
will stop to respond prop-
erly on usercommands.
Countermeasure:
Switch-off your TV and
disconnect from the
220~240V-power-supply.
Disconnect the digital PC-
connection.
Now you may retry operat-
ing your TV.
•
If a digital PC-connection
does show a picture, proper
working is not guaranteed.
Digital PCconnection is not
granted for this TV.
VGA lead
(not supplied)
Audio lead (not supplied)
PC
TV
(Back side view)
to AUDIO 1
input
50A0201A_p04-09.p65 9/12/07, 4:54 PM7