Filter
Top Products
3
AV 1
ANT
IN
PC/HDMI
AUDIO
PC MONITOR
HDMI
SCART
IN
IN
HEAD PHONE
C.I.CARD
AUDIO
L
L
Pb
OUT
OUT
DVB-T DIGITAL
AUDIO
OUT
COMPONENT
Pr
Y
R
R
(MONO)
AUDIO
VIDEO
S-VIDEO
AV 2
(MONO)
CAM
AV 1
ANT
IN
PC/HDMI
AUDIO
PC MONITOR
HDMI
SCART
(A) Aerial input socket: Connect the outdoor aerial to the aerial input socket as shown.
(B) DVB Common Interface: The Common Interface allows you to insert CAM (Conditional Access Module) and
a suitable Smart Card to give you access to additional Pay-TV services (See page 25).
(C)
HEAD PHONE socket: Plug headphones with a mini plug (3.5 mm) into this socket.
(D) AV2 input: Input for analogue A/V-Signal (Composite or S-Video). See page 5.
(E) COMPONENT input: See page 6.
(F) Coaxial digital audio output socket: Connect a coaxial digital audio lead from here to a suitable digital
decoder/amplifier. Only the audio from the TV’s digital tuner will be output via this socket (see page 5).
(G) PC Monitor input (PC): See pages 7 and 8.
(H) PC/HDMI Audio input socket: See pages 7, 9.
(I) HDMI input: See page 9.
(J) Scart socket (AV1): For the connection of other equipment via SCART leads (see page 4).
(K) Power supply: Connect the supplied AC mains lead. Connect to 220~240 V / 50 Hz only. Never repair a
damaged AC mains lead with isolation tape - contact your store if a new AC mains lead is required. If you have
pets in the home, please ensure that they do not bite into any of the leads, as this can be dangerous.
(L) Bracket holes: To fix a wall mounting bracket (not supplied) here.
For any wall or bracket mounting application, ALWAYS use all 4 of the fixings - failure to do this could leave the
set inadequately secured.
Aerial connection
Note: To avoid possible damage, before you make any connections, turn off the TV at the
ww
ww
w
(STANDBY) button and unplug it from the mains. Once the connections are in place, re-connect
the unit to the mains and switch it back on.
(K)
Back Side
(J)
(I) (H)
(G)
(B)
(C)
(D)
(E)
(F)
(L)
(A)
50A0201A_p01-03.p65 9/12/07, 4:54 PM3