Filter
Top Products
New Feature for Network Operations (Remote Setup)
10
● How to define the detection zone
Allows you to set the motion sensor detection zone.
1
Set [Motion Zone] to "PARTIAL ZONE".
A button appears on the right-hand side.
2
Click the button.
You are presented with a screen that prompts you to
define the detection zone.
3
Define the detection zone by clicking (or dragging)
the appropriate grid cells.
This configures the sensor to detect a motion within
your defined zone.
4
Click [OK].
New settings are saved, and the zone definition screen
is closed.
● How to define the schedule for timer recording
You can define the operational schedule for timer recording
(BY SCHEDULE) by using the following steps:
1
Click the [Timer set] button.
The [Schedule] screen appears.
2
Highlight and click the recording mode button (1).
The field (
2) at the upper left corner of the schedule
table indicates the currently selected recording mode in
a specific color.
3
By clicking (or dragging) the appropriate grid cells,
specify the days of the week and the time windows
when recordings should occur.
This configures the DVR to record the video during the
specified time windows.
You can combine multiple recording modes by
repeating the steps above.
Memo: Clicking a day of the week button causes the
currently selected recording mode to default to all
time windows (24 hours).
4
Click [OK].
New settings are saved, and the [Schedule] screen is
closed.
1
2