Filter
Top Products
5
Additions and Changes to Network
Operations
Connecting to the DVR through the network for the first time
requires you to fill in the [Site Name] field of the [Connect]
dialog box.
You cannot connect to the DVR when the [Site Name] field is
blank.
You can view the DVR connection information by opening the
[---Select Site---] pull down menu at the top of the operation
panel, which contains a list of site names.
To connect to another site, highlight and click the site name
from the pull down menu. This disconnects the current
connection and automatically establishes a new connection to
the specified site.
Memo: The connection information you register with the
[Connect] dialog box when connecting to the DVR
can be changed later by choosing [Site] from the
setup menu.
The [AVI Backup] dialog box is now complete with channel
selector check boxes.
You can specify which channel(s) to back up by selecting the
channel boxes. Your specified channels will be backed up in
the order of the channel numbers.
Memo: Empty channels, if any, are skipped.
Now you can select the display language used on the network
operation screens.
To select the display language, use [General] (Miscellaneous
- Language) on the setup menu.
Available languages:
English, Thai, Italian, German, French, Spanish, Japanese
Memo: After changing the settings, restart this software to
put the new settings into effect.
Connecting to the DVR through the
Network (P41)
Connecting to a Different Site (P41)
DVR1
Backing Up Recorded Videos (P49)
Selecting the Display Language (P50)