Filter
Top Products
New Feature for Network Operations (Remote Setup)
11
You can use the SYSTEM settings menu to configure system
and clock settings.
● System Settings
1
DVR ID (P29)
Allows you to define an identifier unique to the DVR.
2 Admin Password (P30)
Allows you to set the password for configuring the DVR
through settings menus.
Memo: The default password is "1111".
3 Network Password (P31)
Allows you to set the password for network operations.
Memo: The default password is "1111".
4 Date Format (P8)
Allows you to set the date format.
5 Language (P9)
Allows you to set the display language.
6 Remote Controller ID (P32)
When using the supplied remote controller to operate the
DVR, you can set the remote controller ID (1 - 9) for
authentication.
Memo: Accepting the default (0) allows you to use the
remote controller without ID authentication.
● Clock Set
1
Set Date & Time (P8)
Allows you to set the current date and time.
Memo: When you change the date/time settings and click the
[Apply] or [OK] button on screen, you are presented
with a confirmation dialog box.
Responding [Yes] to the dialog message forcibly
restarts the DVR so that the new date/time settings
are applied.
2 D.S.T./SUMMER TIME
Allows you to select the summer time region.
• OFF (default):
Turns off the summer time.
• U.S.A:
Applies the USA summer time.
• EU:
Applies the EU summer time.
☞ Select [GMT Area] and set the time difference from
the standard time.
• OTHERS:
Applies a non-USA/EU summer time.
☞ You have to define the beginning and end of the
summer time period.
System Settings
1
2
3
4
5
6
1
2