Filter
Top Products
New Feature for Network Operations (Remote Setup)
13
● DDNS Settings
If you intend to use Sanyo’s DDNS services, choose
"SANYO" and enter your registered domain name.
Memo: • For information on how to register your domain
name, refer to the instruction manual (P35).
• If you want to use third-party DDNS services,
consult your dealer or a "Repair Service Center" in
your local area.
This is a submenu under the NETWORK settings menu.
You can use this menu to configure the DVR to automatically
send a notification e-mail to your specified address in
response to an alarm event.
1 IP Notification
Selecting this check box configures the DVR to send a
notification e-mail when the DVR’s IP address is changed.
2 Event Alarm
Allows you to configure the DVR to send a notification e-mail
when a specific type of event occurs:
• OFF (default)
Selecting this option prevents the DVR from sending any
notification e-mail when an alarm event has occurred.
• By Ext. Sensor
Selecting this option causes the DVR to send a notification
e-mail when a sensor or similar device connected to the
DVR’s external sensor terminal is activated.
•By Motion
Selecting this option causes the DVR to send a notification
e-mail when its built-in motion sensor has detected
movement.
•All
Selecting this option causes the DVR to send a notification
e-mail when an external sensor or its built-in motion
sensor is activated.
3 Mail Address
Enter the recipient’s e-mail address.
4 Mail server settings
Enter the server name of your SMTP server as well as the ID
and password required to log into the SMTP server.
5 Return Mail-Address
Enter the return e-mail address.
When a notification e-mail cannot reach the specified
recipient e-mail address, then the mail is sent to this address.
This menu provides an option to overwrite the hard disk.
If the hard disk becomes full and you want to continue
recording in overwrite mode, then select the check box
provided on this menu.
Send E-Mail Settings (P36)
Changing the settings on this menu forcibly restarts the
DVR.
1
2
3
5
4
Storage Settings (P37)