Filter
Top Products
MENU-SPECIFIC SETTINGS2
English 17
Set timer operation duration and timer recording conditions on a day-specific basis as shown below.
1 Setting timer recording conditions for
different days of the week.
(1) WEEK
These fields specify the days of the week for timer
recording. By using multiple setting rows, it is possible to
setup timer recording a number of different times on a
single day.
(2) START
These fields are used to enter the time at which to start
timer recording.
(3) STOP
These fields are used to enter the time at which to stop
timer recording.
(4) PROGRAM
To carry out program recording, select a program (P-1
through P-4). (JP. 16)
(5) REC RATE
These fields set the recording rate. (JP. 15)
To carry out program recording, set to “***”.
(6) SET
Set these fields to “ON” to set timer recording.
Set these fields to “OFF” when timer recording is not to be set.
(7) SAT, DLY
When the start and stop times, program, and the recording
rate have been entered and “ON” has been selected for
“SET”, you will be able to carry out timer recording over the
same period every day.
(8) EXT
Displays details set by an external timer. (These are not
start and end time settings.)
z If “DLY” is set for any other day, all rows will adopt this
setting.
2 Click [SAVE].
Timer setting (or modification) is completed.
Performing timer recording
Click the button on the operation panel. (JP. 8)
Overlapping of timer reservation times
z If timer settings overlap, recording is performed in
accordance the following priority sequence.
Individual reservations → “DLY” → “EXT”
(High)
←−−−−−−−−−− Priority −−−−−−−−−→ (Low)
z If a reservation for a particular day overlaps with a daily
reservation, priority is given to that with the earliest start
time. If both have the same start time, priority is given to
that with the highest setting position in the menu.
Setting a timer for over 24-hours continuous
recording
The bottom two lines of the TIMER SET screen are
used to make settings for this type of recording.
(1) Click [OVER 24H] to switch the setting format.
(2) Set the day and time for the start of recording in the
upper row.
(3) Set the day, time, program and recording rate for
the end of recording in the lower row.
(4) Select “ON” for “SET” on the bottom row to specify
timer recording extending for over 24 hours.
8. TIMER SET
(1) (3) (4) (6)
(7)
For setting timer
recording spanning
more than 24 hours
(2) (5)
2
(8)
e00_l8hbe_xe_nw_7.book Page 17 Monday, April 26, 2004 10:40 AM