Filter
Top Products
MENU-SPECIFIC SETTINGS2
18 English
NETWORK
SETTINGS
Set the recording conditions for alarm recording as follows.
In order to carry out alarm recording, it will be necessary to
set operation patterns and recording conditions.
1 Select a mode using “ALARM
RECORDING” from the pull-down menu
on the screen.
[Settings] ( indicates default setting.)
Set the picture quality for alarm recording as follows.
2 Select “PICTURE QUALITY” from the
pull-down menu on the screen.
[Settings] ( indicates default setting.)
Audio can be recorded together with images when
performing alarm recording. Note, however, that since this
audio data will also be stored in the alarm recording area,
the recording time for this area will be reduced.
3 Select “AUDIO RECORDING” from the
pull-down menu on the screen.
[Settings] ( indicates default setting.)
z Audio recording can only be specified when the
recording rate is between A30 and A1 FPS.
4 Select “ALARM INTERLEAVE” from the
pull-down menu on the screen.
[Settings] ( indicates default setting.)
9. ALARM REC MODE SET
Setting alarm recording
Setting Description
OFF Does not perform alarm recording.
ENABLED
Alarm recording is always performed,
regardless of timer recording or timer settings.
AL-REC ON
TIMER
Alarm recording is performed only during timer
recording.
AL-REC OFF
TIMER
Alarm recording is performed only during
recording other than timer recording.
OLY AL-RC
ON TMR
Alarm recording is performed only in the
period set for timer recording without timer
recording actually being performed.
1
Setting the picture quality for recording
Setting Description
SUPER FINE Super Fine
FINE Fine
ENHANCED Enhanced
NORMAL Normal
BASIC Basic
Setting audio recording
Setting Description
ON Audio will be recorded.
OFF Audio will not be recorded.
2
3
5
4
6
Setting the alarm interleave
Setting Description
SW
Recording is switched between camera video
including an alarm and video from all connected
cameras.
e00_l8hbe_xe_nw_7.book Page 18 Monday, April 26, 2004 10:40 AM