Filter
Top Products
40 English
DVR VIEWER
1 DVR VIEWER
The DVR Viewer is a program designed specifically for
DVRs. It can be used to play back image and sound data
that has been copied onto media such as computer hard
disk drives, CompactFlash cards.
The DVR Viewer can be downloaded from the Sanyo
website at the URL given below.
Sanyo website URL:
http://www.sanyosecurity.com
z When playing back sound data, you will need Version
1.5 or later.
The following operating environment is required in order to
use the DVR Viewer.
z Applicable operating system: Windows 98, 98SE, Me,
NT4.0, 2000, XP
z Applicable computer: PC/AT compatible computer
running one of the above operating systems
z If an older version of DVR Viewer or ActiveX is installed,
remove them from [Control Panel] → [Add or Remove
Programs] in advance.
Install the DVR Viewer by the following procedure.
1 Starting the installation wizard
Double-click the icon for the downloaded “Setup.exe” file
to start the installation wizard.
2 Selecting the language settings
Select the display language for the software (English) in
the [Choose Setup Language] window and then click [OK].
3 Starting the installation
Click [Next>] in the [Welcome to the InstallShield Wizard
for DVR Viewer] window to start the installation process.
4 Choosing the destination location
Check that the destination folder shown in the [Choose
Destination Location] window is correct, and then click
[Next>].
If you would like to change the folder, click [Browse...] and
specify the desired folder.
5 Starting copying of files
Check that all the settings shown are correct, and then
click [Next>]. Copying of files will then start. If you would
like to change any of the settings, click [<Back].
6 Completion of installation
When the installation is complete, the [Maintenance
Complete] window appears. Click [Finish].
Operating environment
Installing the DVR Viewer
e00_l8hbe_xe_nw_7.book Page 40 Monday, April 26, 2004 10:40 AM