Filter
Top Products
MENU-SPECIFIC SETTINGS2
24 English
NETWORK
SETTINGS
Use the following procedure to set video from individual
cameras to be masked by a gray pattern when it is not
needed on a monitor screen.
1 Set the following functions as required.
2 Click [SAVE].
The setting is saved.
z Network mask settings are valid only for the user
connecting to the network with ID1. Users connecting
using ID2 and ID3 will be able to display all channels.
Check the date and time of power failures and the amount
of hard disk usage as described below.
Check the records for hard-disk initialization and area
resetting.
15. MASK SET
Setting Description
(1) MASK
Turns masking on or off.
(2)
TIME
PERIOD
Selects one of the time periods, T-1 through
T-4.
(3)
CH
Turns each channel's masking on or off
individually for the main monitor, the monitor
2, and network video.
(1)
(2)
2
(3)
16. POWER FAILURE/USED TIME
Item Description
(1)
POWER
FAILURE
Displays the number of power failures and the
date and time of occurrence and restoration
for the four most recent power failures.
(2) USED TIME
Displays the usage time for the digital video
recorder.
DISK1 USE: Total usage time for Disk 1
DISK2 USE: Total usage time for Disk 2
POWER: Total usage time for the unit
(3) FIRMWARE Displays the firmware version.
17. INITIALIZED RECORD
Item Description
(1) DATE Displays the date of the operation.
(2) TIME Displays the time of the operation.
(3) AREA
Displays the area in question and the
corresponding operation content.
(1)
(2)
(3)
(1) (2) (3)
e00_l8hbe_xe_nw_7.book Page 24 Monday, April 26, 2004 10:40 AM