Filter
Top Products
6
Oa Ad
Owner’s Manual
Owner’s Manual
10 SOURCE buttons (see page 30)
Press these buttons to select an input source.
11 On/Standby/Mute indicator (see page 22, 30)
Lights to indicate when the unit is in Standby mode and goes out when
the preamp/processor is active. Also blinks to indicate when the main
volume is muted.
12 MULTI indicator LED (see page 29, 36)
Lights to indicate that the second zone (Zone 2) is active. Note that this
light will remain lit when the other indicators are off, as long as the
second zone is active.
13 PRESET SCAN button (see page 32)
Pressing this button scans the AM or FM stations preset in the tuner’s
memory. Pressing it again stops the scan at the preset indicated in the
FRONT PANEL DISPLAY. The unit’s input source automatically changes
to Tuner when this button is pressed.
14 MEMORY button (see page 32)
Pressing this button when FM or AM is selected as the input source memo-
rizes the current station frequency into one of the presets. You can preset
up to 32 stations.
15 MENU button (see page 22)
Displays menu options on the FRONT PANEL DISPLAY and the On Screen
Display (OSD). Press the button again to exit the Menu mode.
16 Navigation buttons (see page 22)
When in Menu mode, use these buttons to navigate through menu options
displayed on the FRONT PANEL DISPLAY or the On Screen Display (OSD).
These buttons are also used to change options or settings with some of the
front panel controls.
17 SELECT button (see page 22)
When in Menu mode, selects menu options displayed on the FRONT PANEL
DISPLAY or the On Screen Display (OSD).
18 SURR MODE buttons (see page 31)
Press these buttons to select from the various surround modes provided
by the PT-7000. Mode availability depends on setup conguration and
input source.
19 VOLUME control (see page 30)
Adjusts the volume level for the main zone only. Remote zone (Zone 2) is
not affected by this control.
20 MUTE button (see page 31)
Mutes the volume of the Preamp/Processor. The STANDBY/MUTE indicator
blinks. Pressing the button again returns the unit to the previous volume
setting. The STANDBY/MUTE indicator goes out.
Model PT-7000 Front Panel
Model PT-7000 7.1 Channel Preamp/Processor/Tuner
7
Model PT-7000 Front Panel