Filter
Top Products
8
Oa Ad
Owner’s Manual
Model PT-7000 7.1 Channel Preamp/Processor/Tuner
Owner’s Manual
10 Optical Digital Inputs (see page 19-20)
Use these inputs to connect the optical digital audio signal output from
such digital devices as CD, DVD or LD players. These inputs are fully
assignable.
11 Product Serial Number
Write this number in the space provide on page 4 for future reference.
12 Audio Source Input jacks (see page 19-20)
Use these inputs for connection to analog audio sources such as a CD player.
One in/out tape loop is provided for connection to an audio recorder.
13 Video Source Input jacks (see page 19-20)
Use these inputs for connection to the composite video and analog audio
output from sources such as a DVD or LD player, satellite receiver, cable
box, PVR or other video source. Note that when the Component Video
inputs are used, connect the analog audio outputs of the source to the
DVD or Video 1 jacks, as appropriate.
14 VCR jacks (see page 20)
Use these input and output jacks to connect a VCR to the PT-7000.
15 Multizone Output jacks (see page 21)
Use these jacks to supply the analog stereo audio output to an optional
audio amplier used to power the speakers in the remote zone.
16 Monitor Output jack (see page 20)
Connect this output to the composite video input of your monitor or other
video display device.
17 Amplier Output jacks (see page 21)
Use the seven audio channel output jacks to connect the PT-7000 to an
external power amplier. The eighth jack supplies the output to a powered
subwoofer or external subwoofer amplier.
18 5.1 Input Bass Management Control (see page 34)
Setting this switch in the ON position activates an 80Hz High Pass Filter
for the 5.1 channel direct input, except the subwoofer. The bass signals
from the 5 satellite channels are summed and sent on to the subwoofer
output at all times. Setting the switch in the down position turns off the
High Pass Filter and sends full-range audio to all channels. This Bass
Management Control is totally separate from the DSP Bass Management
set up using the front panel or remote control.
19 Coaxial Digital Input jacks (see page 19-20)
Use these inputs to connect the coaxial digital audio signal output from
such digital devices as CD, DVD or LD players. These inputs are fully
assignable.
20 Main Power switch (see page 22)
This switch must be placed on the ON position in order for the PT-7000
to function. Press the button IN to turn the unit on. Press it so that it is
out from the rear panel to remove the PT-7000 from the AC supply when
you are on vacation or do not otherwise wish to have the PT-7000 respond to
front panel or remote control commands.
21 AC Input (see page 21)
Use to connect the supplied AC power cord (see Precautions on page 2).
Front Panel and On Screen Display (OSD)
The FRONT PANEL DISPLAY and ON SCREEN DISPLAY (OSD) provide visual
feedback of the current settings, surround modes and conguration menus of
the unit. Information is constantly displayed at the front panel whenever the
PT-7000 is turned on. To use the OSD, the unit must be connected to your
display device using either the composite or S-Video MONITOR OUT jacks.
The OSD will not operate through the component video outputs of the PT-7000.
However, the OSD output will appear at both the composite and S-Video jacks
regardless of the type of source in use.
The information presented on the front panel is identical to that shown on
your TV monitor, allowing you to perform speaker settings, set up your input
sources, set the listening modes, and much more.
Model PT-7000 Front Panel and On Screen Display
Example of Front Panel
Display when an input
source is selected.
Example of On Screen
Display when an input
source is selected.
Example of Front Panel
Display when the Main
Menu is selected.
Example of On Screen
Display when the Main
Menu is selected.
Front Panel and On Screen Display (OSD)
9