Filter
Top Products
Index to Parts and Controls
14
EN
About the tape transport indicator
During a tape loading
Turns according to the
tape transport
During playback m
During fast forwarding m m
During rewinding M M
Main unit (continued)
To reset the tape counter to “0H00M00S”
Press COUNTER RESET when tape counter is displayed.
The counter resets to “0H00M00S” whenever a tape is
reinserted.
Notes
• The counter stops counting when it comes to a portion with no
recording.
• The counter indication may be inaccurate when a tape that has
blank portions is rewound or fast-forwarded repeatedly.
• During fast-forward, rewind or search, the tape speed
automatically adjusts to the remaining amount of tape. In these
cases, the counter or time code indication may stop momentarily.
• Use the remaining time display as an approximate indication.
The indication may be inaccurate depending on the tape type.
Indicating the remaining
time
The beginning of the tape
The end of the tape
Indicating tape tranport
direction and speed
How to check the display window
Check the TIME CODE and Tape Counter
Each time you press COUNTER SELECT, the indications
change as follows: “Time code” n “Remaining time” n
“Tape counter”
(Illustration: DSP-30P)
To see the indications on the monitor screen
Press DISPLAY.
Counter indications appear on the monitor screen. If you
press the button again, the indications disappear from
the screen.
Time code
Remaining time + Current time
Tape counter + Current time