Filter
Top Products
Playback
29
EN
Displaying tape
information
Tip
When the information was
not recorded, “---” appears
instead.
Notes
• The camcorder data
displayed on the monitor
screen by this VCR are
partially different from
those shown by the digital
camcorder.
• You cannot see the “CLIP
LINK” information on this
VCR.
(Illustration: DSP-30P)
31/ 12 / 1996
21:45 CAM
AUTO
50 MANUAL
F 1.6 0 dB
If you record a tape using a Sony digital camcorder DSR-200/200P,
camcorder data (the shutter speed, program AE mode, white balance,
iris and gain) can be recorded on the tape. You can check these data
during playback on this VCR.
Press DATA CODE during playback.
Each time you press DATA CODE, the display changes as follows.
Data display off
Recording date and time
Shutter speed
Gain
Iris
Program AE mode
White balance
Sony camcorder settings