Sony DSR-30P VCR User Manual


 
Additional Information
57
EN
Specifications
System
Recording format
DVCAM format
Video signal
DSR-30: EIA STANDARD, NTSC color
system
DSR-30P: CCIR STANDARD, PAL
colour system
Usable cassettes
Standard-DVCAM cassettes and Mini-
DVCAM cassettes
Recording time
184 minutes (when using the PDV-
184ME cassette)
40 minutes (when using the PDVM-
40ME cassette)
Clock
Quartz locked
DSP-30: 12-hour cycle display
DSP-30P: 24-hour cycle display
Power back-up
Built-in self-charging capacitor
Back-up duration: up to 30 minutes
Inputs and outputs
Video input
LINE-1 IN, BNC connector
Input signal: 1 Vp-p (75 ohms
unbalanced)
LINE-2 IN, pin jack
Input signal: 1 Vp-p (75 ohms
unbalanced)
Video output
LINE-1/LINE-2 OUT, BNC connector
Output signal: 1 Vp-p (75 ohms
unbalanced)
S VIDEO input
LINE-1/LINE-2 IN, Mini DIN 4-pin
Luminance signal: 1 Vp-p (75 ohms
unbalanced)
Chrominance signal: 0.286 Vp-p (75
ohms unbalanced)
S VIDEO output
LINE-1/LINE-2 OUT, Mini DIN 4-pin
Luminance signal: 1 Vp-p (75 ohms
unbalanced)
Chrominance signal: 0.286 Vp-p (75
ohms unbalanced)
Audio input
LINE-1/LINE-2 IN, phono jack (L, R)
Input level: 2 Vrms (full bit)
Input impedance: more than 47
kohms)
Audio output (ID-2)
LINE-1/LINE-2 OUT, phono jack (L, R)
Output level: 2 Vrms (full bit)
Output impedance: less than 10 kohms)
Control S input/output
Minijack
Control S output
Minijack
LANC input/output
Front panel and rear panel
Stereo mini-mini jack (2)
Headphone output
Stereo minijack (1)
Microphone input
Minijack (1) (monaural)
DV IN / OUT
4-pin jack (1)
General
Power requirements
DSP-30: 120 V AC, 60 Hz
DSP-30P: 220 – 240 V AC, 50 Hz
Power consumption
37 W
Operating temperature
5°C to 40°C (41°F to 104°F)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Dimensions
Approx. 430 × 129 × 374 mm
(17 × 5
1
8 × 14
3
4 inches)
(w/h/d, including projecting parts and
controls)
Mass
Approx. 10 kg (22 lb. 7 oz.)
Supplied accessories
Remote commander (1)
Size AA (R6) batteries (2)
AC power cord (1)
LANC cable (1)
Cleaning cassette (1)
Design and specifications are subject to
change without notice.