Filter
Top Products
Playback
31
EN
Note
The VCR cannot search for
an index or unrecorded
portion within 20 seconds
from the beginning of the
tape.
This VCR can repeat the playback of all or part of the tape
automatically.
1 Set the EXTERNAL TIMER switch at the rear of the main
unit to “PB [AUTO REPEAT].”
The AUTO REPEAT indicator on the front panel lights.
2 Press (.
Playback starts automatically. The VCR repeats the playback
from the beginning to the first index (if there is no index on the
tape, to the unrecorded portion; if no unrecorded portion, to the
tape end).
Auto Repeat using an external AC timer
If you connect an external AC timer (not supplied) to this VCR, you can
repeat playback automatically at the preset time.
1 Connect an external AC timer (not supplied) to this
VCR.
2 Set the EXTERNAL TIMER switch at the rear of the main
unit to “PB [AUTO REPEAT].”
The AUTO REPEAT indicator on the front panel lights.
3 Set the timer-on time on the external AC timer.
At the preset time, the power turns on, and after a few 30
seconds (no more than 30), Auto Repeat playback starts
automatically.
To stop Auto Repeat
Press p.
To release Auto Repeat mode
Set the EXTERNAL TIMER switch to “OFF.”
Auto Repeat
EXTERNAL TIMER switch
to a wall outlet
Caution
While a tape is running, do
not turn off the power, using
an AC timer. The VCR and a
tape may be damaged. When
turning off the power of the
VCR, make sure to press p
on this VCR first to stop the
tape transport, then turn off
the power.