Filter
Top Products
26 Chapter 2 Playback and Recording
Chapter 2 Playback and Recording
Playback
• If you connect the input connectors of the unit to the
output connectors of a monitor, a humming noise
may be generated or the image may be distorted. If
these phenomena occur, use INPUT SELECT switch
to select a signal that is not being input or disconnect
the cables.
• To connect i.LINK cable between a monitor and the
unit, use an HDV or DV-compatible monitor. To play
back a tape recorded in HDV mode on a DV-
compatible monitor, set [HDV t DV CONV] of
[i.LINK SET] in [IN/OUT REC] menu to [DVCAM]
or [DV SP] before connecting the unit with the
i.LINK cable.
For details, refer to your monitor’s instruction manual.
• Some general consumer television sets are provided
with a function to control equipment connected with
the i.LINK cable. Such a function, however, may not
work with the unit.