Chapter 4 Adjusting and Setting Through Menus
Chapter 4 Adjusting and Setting Through Menus 53
You can select the desired language on Data display screen. You can choose Simplified
English if your native language is not available among the options.
Selects the control device.
WIRELESS : Enables the control of Remote Commander.
CONTROL S : Enables the control of the remote control unit DSRM-10 (not supplied)
connected to CONTROL S IN jack. (Remote Commander is disabled.)
Notes
• The unit accepts signals from any Sony Remote Commander whose command mode is
set to VTR4, not only the supplied one. To disable the control from any Remote
Commander, set this item to [CONTROL S].
• You can also use the DSRM-20 (no longer manufactured: not supplied).
LANGUAGE
COMMANDER
(page 16)
Selects the recording mode of the time code when 60i is selected.
AUTO : Automatically sets the mode in accordance with the mode already set on a
cassette tape. (If nothing is recorded on the tape, the non-drop frame
mode is set. If the unit cannot correctly read the frame mode on the tape, it
will use the frame mode that was set in the last position on the tape that
the unit can read correctly. If you remove the cassette, the mode of the
last position that the unit was able to read correctly is cleared and the non-
drop frame mode is set when recording is restarted from the same
position.)
DF : Selects the drop frame mode.
NDF : Selects the non-drop frame mode.
Note
When [60i/50i SEL] is set to [50i], the unit operates as a 50i specification model. Therefore,
the internal time code is set to the non-drop frame mode. Even if 60i signals are input to
HDV/DV jack when [60i/50i SEL] is set to [50i], the time code generated by the unit is in the
non-drop frame mode regardless of [TC FORMAT] setting. To set the time code in the drop
frame mode, set [60i/50i SEL] to [60i]. As a result, [TC FORMAT] setting will return to the
status before [60i/50i SEL] was set to [50i].
Reset the time code value to 00:00:00:00.
NO : Does not reset the time code value.
YES : Resets the time code value.
Note
This setting is available only when the unit in REC or REC PAUSE mode. Also, when
INPUT SELECT switch is set to HDV/DV and [HDV/DV IN TC] is set to [EXTERNAL], this
setting will not be affected and the time code will not be reset.
Icon/Menu Submenu Setting
TC/UB SET
TC FORMAT
TC RESET
OTHERS menu
Icon/Menu Submenu Setting
OTHERS
(Continued)