Filter
Top Products
5-2 Menu Operations
Chapter 5 Setup Menu
5-4 Chapter 5 Setup Menu
Switching system frequency (menu item
013)
Using the following procedure, you can set SYSTEM
FREQUENCY SELECT, basic menu item 013, to
“ON,” and then switch the system frequencies between
29.97, 25, 24 (J-H3 only), 23.98 (J-H3 only), and
23.98PD (J-H3 only).
(The following procedure is an example of switching
from a 29.97 system to a 25 system.)
1 Select SYSTEM FREQUENCY SELECT, basic
menu item 013, and display it.
The time data display and the monitor screen
connected to VIDEO OUTPUT connectors show
the following displays.
Time data display
Monitor screen
2 Holding down the JOG/SHUTTLE button, turn the
JOG/SHUTTLE dial to change the setting from
“OFF” to “ON,” then release the JOG/SHUTTLE
button.
The displays change as follows.
3 Press the SET/MENU button.
The displays change as shown below.
Time data display
Monitor screen
Time data display
Monitor screen
SYSTEM FREQUENCY
SELECT
ITEM-013
ON
Push SET button!!
29.97 PsF (59.94i)
SYSTEM FREQUENCY SELECT
If the Frequency setting
is changed, Turn power
off and on again.
KEY PARAMETER
H13----
.
.
.
.
012----
013:SYSTEM SEL-off
020----
❉
Items without ❉ are omitted.