Filter
Top Products
Chapter 6 Maintenance and Inspection
Chapter 6 Maintenance and Inspection 6-3
6-4 Error Messages
CODE MESSAGE ERRORS
01 REEL TROUBLE Detected “tape slack” during threading or unthreading.
02 REEL TROUBLE Detected “tape slack” or “tape break” during search, fast-forward, or rewind.
03 REEL TROUBLE Detected “tape slack,” “tape break,” or “reel rock in the S-side or T-side” during playback.
04 REEL TROUBLE Detected abnormal tape speed during fast-forward or rewind.
05 REEL TROUBLE Detected abnormal operation on the S-side or T-side reel during cassette compartment
operation.
06 TAPE TENSION Detected excessive tape tension during playback.
07 CAPSTAN TROUBLE Detected abnormal operation of capstan motor.
08 DRUM TROUBLE Detected abnormal operation of drum motor.
09 TH/UNTH MOTOR Detected abnormal operation during threading or unthreading.
0A THREADING Detected incorrect ending of process for tape top when threading.
10 HUMID Detected moisture condensation.
11 TAPE T/E SENSOR Detected tape top and tape end simultaneously.
12 TAPE TOP SENSOR Detected abnormal condition in tape top sensor.
13 TAPE END SENSOR Detected abnormal condition in tape end sensor.
14
1)
FAN MOTOR Detected abnormal operation in the cooling fan motor.
20 CASS COMP MOTOR Detected abnormal condition during cassette compartment operation.
92 INTERNAL I/F ERROR Detected abnormal condition in communication between SYS CPU and other CPU/MPUs.
96 SY NV-RAM ERROR Detected abnormal operation in a system control device, NV-RAM.
97 SV NV-RAM ERROR Detected abnormal operation in a servo system device, NV-RAM.
98 RF NV-RAM ERROR Detected abnormal operation in an RF system device, NV-RAM.
1) J-H3 only