Filter
Top Products
Chapter 5 Setup Menu
Chapter 5 Setup Menu 5-11
Item number
Item name
Settings
601 VITC POSITION SEL-1
(J-H1: No item)
(J-H3: 29.97/25/23.98PD
system only)
In 29.97/23.98PD system
Selects a line to be inserted by the VITC signal (SD output).
12H ... 16H ... 20H: Select a line from line 12 to line 20.
Note
You can insert the VITC signals into two places. When you insert the signals into
those two places, set VITC POSITION SEL-1, extended menu item 601, and
VITC POSITION SEL-2, extended menu item 602, beforehand.
In 25 system
Selects a line to be inserted by the VITC signal (SD output).
9H ... 19H ... 22H: Select a line from line 9 to line 22.
Note
You can insert the VITC signals into two places. When you insert those signals
into two places, set VITC POSITION SEL-1, extended menu item 601, and VITC
POSITION SEL-2, extended menu item 602, beforehand.
602 VITC POSITION SEL-2
(J-H1: No item)
(J-H3: 29.97/25/23.98PD
system only)
In 29.97/23.98PD system
Selects a line to be inserted by the VITC signal (SD output).
12H ... 18H ... 20H: Select a line from line12 to line 20.
Note
You can insert the VITC signals into two places. When you insert the signals into
those two places, set VITC POSITION SEL-1, extended menu item 601, and
VITC POSITION SEL-2, extended menu item 602, beforehand.
In 25 system
Selects a line to be inserted by the VITC signal (SD output).
9H ... 21H ... 22H: Select a line from line 9 to line 22.
Note
You can insert the VITC signals into two places. When you insert those signals
into two places, set VITC POSITION SEL-1, extended menu item 601, and VITC
POSITION SEL-2, extended menu item 602, beforehand.
619 VITC
(J-H1: No item)
(J-H3: 29.97/25/23.98PD
system only)
Selects whether or not to insert the VITC signal into the output signals of the SD
(D CONV.) connectors.
ON : Insert.
OFF: Do not insert.
620 TC CONVERSION AT 24F
(25 system only)
Selects whether or not to convert a 24-frame time code into a 25-frame time code
when you play back a tape in 25-frame mode (off-speed playback), which was
originally recorded in 24-frame mode with the system frequency set to 25.
OFF : Do not convert time code.
ON: Convert time code.
621 STARTING TC SELECT Selects the time code standard before converting 24-frame time code into 25-
frame time code.
623
24F TC A-FRAME
SELECT
(J-H1: No item)
(J-H3: 23.98PD system
only)
Sets a reference value for the playback time code (the time code to be
designated as A-FRAME) when 2-3 pulldown playback is performed.
Sets the reference value for the output time code (the time code to be designated
as A-FRAME) using 30F TC A-FRAME SELECT, extended menu item 624.
Using the difference between the value set in this item and the value set in
extended menu item 624, converts 23.98-frame time code into 29.97-frame time
code and outputs it.
624 30F TC A-FRAME
SELECT
(J-H1: No item)
(J-H3: 23.98PD system
only)
Sets a reference value for the output time code (the time code to be designated
as A-FRAME) when 2-3 pulldown playback is performed.
Sets the reference value for the playback time code (the time code to be
designated as A-FRAME) using 24F TC A-FRAME SELECT, extended menu
item 623.
Using the difference between the value set in this item and the value set in
extended menu item 623, converts 23.98-frame time code into 29.97-frame time
code and outputs it.